Package Contents; Markings On Tool; Description (Fig. A) - DeWalt XR DCS356 Original Instructions Manual

English
Battery Type
The following tools operate on a 18 volt battery pack:
DCS355, DCS356.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCB546, DCB547, DCB548, DCB549. Refer to
Technical Data for more information.

Package Contents

The package contains:
1 Adaptor for all blades
1 31 mm x 43 mm Fastcut wood blade
1 Sanding‑pad
1 31 mm x 43 mm Wood with nails blade
1 Rigid scraper blade**
1 Blade adaptor and hex key
1 Dust extraction adaptor**
1 Cutting guide**
1 100 mm Semicircle blade**
25 Assorted sandpaper pieces
1 9.5 mm x 43 mm Wood detail blade**
1 3 mm Carbide grout removal blade (100 mm half moon)**
1 Cutting guide hex key**
1 Charger
1 TSTAK kitbox
1 Li‑Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li‑Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li‑Ion battery packs (C3, D3, E3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
** Accessory included only with NT models and kits containing
battery and charger.
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
12
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
25
The date code , which also includes the year of manufacture,
is printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 Variable speed trigger
2 LED Worklight
3 Accessory clamp lever
4 Lock on/off button
5 Accessory side mount slots
6 Cut guide block
7 Cut guide arm
8 Battery pack
9 Battery release button
10 Speed selector (DCS356)
Intended Use
This oscillating multi‑tool is designed for professional detail
sanding, plunge cutting, flush cutting, removal of excess
materials and surface preparation applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This oscillating multi‑tool is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
2021 XX XX
WALT battery packs and chargers.
e