Creating And Using A Rescue Medium - Lenovo ThinkCentre M75e 4162 User Manual

Lenovo thinkcentre m75e 4162: user guide

Hide thumbs

Table Of Contents

Table of Contents

• Rescue files from your hard disk drive or from a backup The Rescue and Recovery workspace enables

you to locate files on your hard disk drive and transfer them to a network drive or other recordable media,

such as a USB device or a disc. This solution is available even if you did not back up your files or if

changes were made to the files since your last backup operation. You can also rescue individual files from

a Rescue and Recovery backup located on your local hard disk drive, a USB device, or a network drive.

• Restore your hard disk drive from a Rescue and Recovery backup If you have backed up your hard disk

drive using the Rescue and Recovery program, you can restore the hard disk drive from a Rescue and

Recovery backup, even if you cannot start the Windows operating system.

• Restore your hard disk drive to the factory default settings The Rescue and Recovery workspace enables

you to restore the complete contents of your hard disk drive to the factory default settings. If you have

multiple partitions on your hard disk drive, you have the option to restore the factory default settings to the

C: partition and leave the other partitions intact. Because the Rescue and Recovery workspace operates

independently from the Windows operating system, you can restore the factory default settings even if

you cannot start the Windows operating system.

Attention: If you restore the hard disk drive from a Rescue and Recovery backup or restore the hard disk

drive to the factory default settings, all files on the primary hard disk drive partition (usually drive C:) will be

deleted in the recovery process. If possible, make copies of important files. If you are unable to start the

Windows operating system, you can use the rescue files feature of the Rescue and Recovery workspace to

copy files from your hard disk drive to other media.

To start the Rescue and Recovery workspace, do the following:

1. Make sure the computer is turned off.

2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or

see a logo screen, release the F11 key.

3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescue

and Recovery workspace opens after a short delay.

Note: If the Rescue and Recovery workspace fails to open, see "Solving recovery problems" on page 46.

4. Do one of the following:

• To rescue files from your hard disk drive or from a backup, click Rescue files and follow the

instructions on the screen.

• To restore your hard disk drive from a Rescue and Recovery backup or to restore your hard disk drive

to the factory default settings, click Restore your system and follow the instructions on the screen.

For more information about the features of the Rescue and Recovery workspace, click Help.

Notes:

1. After restoring your hard disk drive to the factory default settings, you might have to reinstall device

drivers for some devices. See "Installing or reinstalling device drivers" on page 46.

2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If you need to recover

or reinstall your Microsoft Office or Microsoft Works applications, you must use the Microsoft Office

CD or Microsoft Works CD. These discs are provided only with computers preinstalled with Microsoft

Office or Microsoft Works.