Troubleshooting; Technical Specifications - Buffalo DR755 Instruction Manual

Heat bulb replacement
Each standard Heat Shade is suitable for a clear or infrared heat bulb rated at or
below 250 watts.
1. To replace a bulb, place the power switch (I/O) in the OFF position (O) and allow the bulb and shade
to cool completely.
2. Bulbs have a threaded base. Unscrew the bulb counter-clockwise from the unit and replace with a
new bulb.

Troubleshooting

Fault
Appliance not The unit is not switched on
working
Lead is damaged
Power supply
Lamp expired

Technical Specifications

Model Voltage
DR755 220-240V 50/60Hz
DR756 220-240V 50/60Hz
DR757 220-240V 50/60Hz
DR758 220-240V 50/60Hz
DR759 220-240V 50/60Hz
DY460 220-240V 50/60Hz
DY461 220-240V 50/60Hz
DY462 220-240V 50/60Hz
DY463 220-240V 50/60Hz
DY464 220-240V 50/60Hz
DY465 220-240V 50/60Hz
DR755-DR759_DY460-DY465_ML_A5_v4_20210326.indb 5 DR755-DR759_DY460-DY465_ML_A5_v4_20210326.indb 5
Probable Cause
Check the unit is hardwired correctly and
switched on
Call BUFFALO agent or qualified Technician
Check power supply
Replace lamp of the same type
Range of cord
Power
(mm)
250W 1500
250W 1500
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
250W 280 - 1520
UK
Solution
Dimensions
Weight
h x w x d mm
284 x 186 x 186 0.7kg
284 x 186 x 186 0.7kg
310 x 177 x 177 1.05kg
310 x 177 x 177 1.05kg
310 x 177 x 177 1.05kg
295 x 292 x 292 1.36kg
295 x 292 x 292 1.36kg
295 x 292 x 292 1.36kg
310 x 272 x 272 1.1kg
310 x 272 x 272 1.1kg
310 x 272 x 272 1.1kg
2021/3/26 10:25 2021/3/26 10:25
5