Safety Tips - Buffalo DR755 Instruction Manual

UK

Safety Tips

Electrical requirements:
This appliance should only be connected to the mains
electricity supply by a qualified electrician. Hardwire the
Heat Shade into a suitable power supply with correct
voltage and sufficient power capacity. Refer to the
product label (serial plate) on the warmer for voltage
and wattage requirements.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Caution! Hot surface!
• Always switch off and disconnect the power supply
to the appliance when not in use, before cleaning and any
maintaining/service procedure.
• This appliance is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials, such
as drapes and other furnishings, away from appliance.
• Extreme caution is necessary when any appliance is used by or
near children and whenever the appliance is left unattended.
• This appliance has electrical parts. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored.
• DO NOT obstruct or cover the appliance in any way when in
use.
• Clean the appliance thoroughly before and after each use
following the cleaning instructions provided in this manual.
2
DR755-DR759_DY460-DY465_ML_A5_v4_20210326.indb 2 DR755-DR759_DY460-DY465_ML_A5_v4_20210326.indb 2 2021/3/26 10:25 2021/3/26 10:25