Bosch SMI50C02GB Operating Instructions page 3

Switching on the appliance
1. Switch the ON/OFF switch
2. Rotate programme selector to the required programme. The expected programme duration flashes on
the digital display.
3. Press START button. The programme starts running.
Remaining running time display
When the programme is selected, the remaining running time of the programme is indicated on the digital
display.
The running time is determined during the programme by the water temperature, the number of utensils
as well as the degree of soiling and may vary depending on the selected programme.
Timer programming *
You can delay the start of the programme in 1-hour steps up to 24 hours.
• Close the door
• Switch the ON/OFF switch
• Press button 6 until the digital display jumps to
• Press button 6 until the displayed time corresponds with your requirements.
• Press START button, timer programming is activated.
• To delete the preselected starting time, press the button 6 until is indicated on the digital display.
• You can change your programme selection at any time until the programme starts.
End of programme
The programme has ended when the value is indicated on the numerical display.
Switching off automatically after the end of the programme *
*depending on model
To save energy, the dishwasher is switched off 1 minute after the programme ends.
At the end of the programme please open the door fully and not partially when emptying the dishwasher.
Remove the utensils when they have cooled down.
Interrupting the programme
Switch off ON/OFF switch, the LEDs go out. The programme is saved.
•