1. Manuals
  2. Brands
  3. Efka Manuals
  4. Control Systems
  5. euramot AB60D1472
  6. Manual

Efka euramot AB60D1472 Manual

Hide thumbs Also See for euramot AB60D1472:
Table of Contents

Advertisement

Quick Links

CONTROL
AB60D1472
M
K L2279a
LIST OF PARAMETERS
CONNECTION DIAGRAM
TIMING DIAGRAMS
No. 402290
English
FRANKL & KIRCHNER
EFKA OF AMERICA INC.
EFKA ELECTRONIC MOTORS
GMBH & CO KG
SINGAPORE PTE. LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the euramot AB60D1472 and is the answer not in the manual?

Questions and answers

Related Manuals for Efka euramot AB60D1472

Summary of Contents for Efka euramot AB60D1472

  • Page 1 CONTROL AB60D1472 K L2279a LIST OF PARAMETERS CONNECTION DIAGRAM TIMING DIAGRAMS No. 402290 English FRANKL & KIRCHNER EFKA OF AMERICA INC. EFKA ELECTRONIC MOTORS GMBH & CO KG SINGAPORE PTE. LTD.

  • Page 2: Table Of Contents

    EFKA AB60D1472 CONTENTS Page 1 Table of Adapter Cords 2 Putting into Service 3 Operating Elements and Connectors Position of the Operating Elements, Displays and Connectors Connection Diagram 4 Connection Scheme of an SM210A Stepping Motor Control Adapter Cords 5 Timing Diagrams...

  • Page 3: Table Of Adapter Cords

    EFKA AB60D1472 1 Table of Adapter Cords ATTENTION! Before switching functional sequences, detach cables from the inputs and outputs! Please ensure that the machine installed provides the functional sequence to be set! Then proceed with the setting using parameter 290!

  • Page 4: Putting Into Service

    EFKA AB60D1472 Explanation of letter symbols of the previous page and chapter ”Timing Diagrams“ Outputs: Inputs: = Sewing foot lifting = Needle up/down = Thread trimmer pos. 1...1A = Single stitch = Thread trimmer pos. 1A...2 FLEX = External sewing foot lifting FA1+2 = Thread trimmer pos.

  • Page 5: Operating Elements And Connectors

    EFKA AB60D1472 3 Operating Elements and Connectors 3.1 Position of the Operating Elements, Displays and Connectors B80 B2 Display K L2280a S1 P key Call or exit programming mode S2 E key Softstart on / off Enter key for modifications in the programming mode...

  • Page 6: Connection Diagram

    EFKA AB60D1472 3.2 Connection Diagram Inputs switched to 0V ATTENTION! When connecting the outputs, ensure that a total power of 70VA constant load will not be exceeded! - Input 1 - Output 1 POS1 - Position 1 - Input 3...
  • Page 7 EFKA AB60D1472 Inputs switched to +24V ATTENTION! When connecting the outputs, ensure that a total power of 70VA constant load will not be exceeded! Nominal voltage 24V, no-load voltage max. 36V Transistor output with open collector max. 40V, 10mA Nominal voltage 15V, I...
  • Page 8 EFKA AB60D1472 Inputs switched to 0V Inputs switched to +24V Input 1 Input 3 Input 4 Functions of the keys can be selected for all inputs in1, in3 and in4 of the sockets ST2 and B4 using parameters 240, 242 and 243.
  • Page 9 EFKA AB60D1472 Table: Coding of the Pedal Steps Pedal step Full heelback (e. g. initiating the seam end) Slight heelback (e. g. sewing foot lifting) Pedal in pos. 0 (neutral) ½ Pedal slightly forward (e. g. sewing foot lowering) Speed stage...

  • Page 10: Connection Scheme Of An Sm210A Stepping Motor Control

    EFKA AB60D1472 4 Connection Scheme of an SM210A Stepping Motor Control V810/V820 DC1600 variocontrol 820 variocontrol 810 m ot B 7 76 B776 B 19 B 18 control LSM . . . Nr. 1113113 SM210..AB60D..K L2510 The AB60D..control (B18) and the SM210A..stepping motor control (B18) are connected by means of adapter cord no.

  • Page 11: Adapter Cords

    EFKA AB60D1472 4.1 Adapter Cords Note The following adapter cords contain connections that are not used by the AB60D control. See chapter Connection Diagram of the ST2 and B4 sockets and compare inputs and outputs. Adapter cord for AISIN models AD3XX, AD158, 3310 and EK1...
  • Page 12 EFKA AB60D1472 Adapter cord for BROTHER model FD3 B257 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 Input in3 Set parameter 242 = 18 Nr. 1112822 ZSTV...
  • Page 13 EFKA AB60D1472 Adapter cord for DÜRKOPP ADLER models 210, 270 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in3 Set parameter 242 Input in4 Set parameter 243 Nr. 1112845 POS1 +24V...
  • Page 14 EFKA AB60D1472 Note Adapter cords nos. 1112816 and 1113132 can only be used for signals with sewing foot lifting and thread trimmer. A manual backtack is possible only if one of the outputs M1...M3 is switched to a different function using the corresponding parameter, and the key is connected to one of the inputs in1, in3 or in4 directly on the 37-pin plug.
  • Page 15 EFKA AB60D1472 Adapter cord for JUKI model LU1510-7 Setting the functional sequence Thread trimming mode Set parameter 290 = 20 Setting the functions of the keys Input in3 Set parameter 242 = 31 (Automatic setting) Input in4 Set parameter 243 = 32 Nr.
  • Page 16 EFKA AB60D1472 Adapter cord for KANSAI model RX9803 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 Nr. 1113130 +24V +24V +24V +24V +24V +24V +24V +24V K L2362 Rear view (soldering side) of 37-pin plug (ST2).
  • Page 17 EFKA AB60D1472 Adapter cord for PFAFF model 1425 Setting the functional sequence Thread trimming mode Set parameter 290 = 13 Setting the functions of the keys Input in1 Set parameter 240 (Automatic setting) Input in3 Set parameter 242 = 24...
  • Page 18 EFKA AB60D1472 Adapter cord for PEGASUS model W500/UT Setting the functional sequence Thread trimming mode Set parameter 290 Thread trimming mode Set parameter 290 = 17 Setting the functions of the keys Input in1 Set parameter 240 Attention! If parameters 290 = 17, the lead of socket ST2/34 of the adapter cord below must be resoldered to ST2/37.
  • Page 19 EFKA AB60D1472 Adapter cord for RIMOLDI model F27 Setting the functional sequence Thread trimming mode Set parameter 290 Nr. 1113096 +24V +24V +24V +24V K L2346 Rear view (soldering side) of 37-pin plug (ST2) and of the remaining sockets. Adapter cord for SINGER models 211, 212 and 591...
  • Page 20 EFKA AB60D1472 Adapter cord for UNION SPECIAL models CS100 and FS100 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 Input in3 Set parameter 242 Nr. 1112905 +24V...
  • Page 21 EFKA AB60D1472 Adapter cord for UNION SPECIAL models 34000 and 36200 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 Input in3 Set parameter 242 Input in4 Set parameter 243 = 18 Nr.
  • Page 22 EFKA AB60D1472 Adapter cord for YAMATO chainstitch machines VC series Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 Nr. 1112818 +24V +24V +24V +24V +24V +24V K L2237...
  • Page 23 EFKA AB60D1472 Adapter cord for YAMATO backlatch machine model ABT3 Setting the functional sequence Thread trimming mode Set parameter 290 Setting the functions of the keys Input in1 Set parameter 240 (Automatic setting) Input in3 Set parameter 242 = 10 Nr.

  • Page 24: Timing Diagrams

    EFKA AB60D1472 5 Timing Diagrams Mode 0 (lockstitch) 0 1 2 POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA1) ST2/37 (FA2) ST2/28 (FW) ST2/27 ST2/32 0251/ M O D E- 0 Mark Function Parameter Control Mode 0 290 = 0 Softstart On...
  • Page 25 EFKA AB60D1472 Mode 1 (lockstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 (FA2) ST2/28 (FW) ST2/27 ST2/32 0251/ M O D E- 1 Mark Function Parameter Control Mode 1 290 = 1 Softstart On Key S2 Thread trimmer and thread wiper On...
  • Page 26 EFKA AB60D1472 Mode 2 (lockstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/28 (FSPL) ST2/27 ST2/32 0251/ M O D E- 2 Mark Function Parameter Control Mode 2 290 = 2 Softstart On Key S2 Thread trimmer On Key S3 Positioning speed...
  • Page 27 EFKA AB60D1472 Mode 3 (lockstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 FSE FSA (FSPL) ST2/28 (FW) ST2/27 ST2/32 0251/ M O D E- 3 Mark Function Parameter Control Mode 3 290 = 3 Softstart On Key S2 Thread trimmer and thread wiper On...
  • Page 28 EFKA AB60D1472 Mode 4 (chainstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA-R) ST2/37 (FA-V) ST2/28 (FW) ST2/27 (ML) ST2/32 0251/ M O D E- 4 Mark Function Parameter Control Mode 4 290 = 4 Softstart On Key S2 Thread trimmer and thread wiper On Key S3 Signal “machine running”...
  • Page 29 EFKA AB60D1472 Mode 5 (chainstitch) parameter 196 = 0 + -2 POS.1 ST2/20 POS.2 ST2/21 ST2/35 kd1 kt1 ST2/37 kd2 kt2 kd2 kt2 ST2/28 ST2/27 ST2/32 0251/ M O D E- 5a Mark Function Parameter Control Mode 5 290 = 5...
  • Page 30 EFKA AB60D1472 Mode 5 (chainstitch) parameter 196 = 1 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 ST2/27 ST2/32 0251/ M O D E- 5b Mark Function Parameter Control Mode 5 290 = 5 Chainstitch Pegasus 196 = 1 Thread trimmer and thread wiper On...
  • Page 31 EFKA AB60D1472 Mode 5 (chainstitch) parameter 273 = ON 0 1 2 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/27 Ad2 At2 kd2 kt2 ST2/28 ST2/32 0251/ M O D E- 5c Mark Function Parameter Control Mode 5 290 = 5 Function “initial trimming”...
  • Page 32 EFKA AB60D1472 Mode 4, 5, 6 or 7 (function “unlocking the chain” with light barrier) POS.1 4 5 6 7 ST2/20 POS.2 ST2/21 ST2/35 ST2/32 ENTK 0251/ EN TK - 1 Mark Function Parameter Control Mode 5 290 = 5...
  • Page 33 EFKA AB60D1472 Mode 4, 5, 6 or 7 (function “unlocking the chain”) 1/ 2 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/32 (ENTK) ST2/8 0251/ EN TK - 2 Mark Function Parameter Control Mode 5 290 = 5 Thread trimmer On or Off *)
  • Page 34 EFKA AB60D1472 Mode 6 (chainstitch with tape cutter) parameter 232 = OFF / with clamp parameter 020 = ON 0 1 2 3 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 (AH) ST2/27 ST2/32 in1 (AH) ST2/7 0251/ M O D E- 6a...
  • Page 35 EFKA AB60D1472 Mode 6 (chainstitch with fast scissors) parameter 232 = ON POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 kd2 kt2 (AH1) ST2/28 (AH2) ST2/27 ST2/32 (AH) ST2/7 0251/ M O D E- 6b Mark Function Parameter Control Mode 6 290 = 6...
  • Page 36 EFKA AB60D1472 Mode 7 (overlock) parameter 232 = OFF (tape cutter) / parameter 018 = OFF (seam end with stop) 5 6 7 8 1 2 3 4 5 6 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 c4 < c2 <...
  • Page 37 EFKA AB60D1472 Mode 7 (overlock) parameter 232 = ON (fast scissors) / parameter 018 = OFF (seam end with stop) 5 6 7 8 1 2 3 POS.1 ST2/20 POS.2 ST2/21 ST2/35 (AH1) ST2/27 (AH2) ST2/28 < ST2/37 ST2/32 0251/ M O D E- 7c...
  • Page 38 EFKA AB60D1472 Mode 7 (overlock) parameter 232 = OFF (tape cutter) / parameter 018 = ON (seam end without stop) 0 1 2 3 0 1 2 3 4 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 (AH) ST2/27 ST2/32 025 1/ M O D E- 7b...
  • Page 39 EFKA AB60D1472 Mode 7 (overlock) parameter 232 = OFF (tape cutter) / parameter 018 = OFF / parameter 148 = 1 (sequence with chain suction) 5 6 7 8 2 3 4 5 6 POS.1 ST2/20 POS.2 ST2/21 ST2/35 (KS) ST2/37 <...
  • Page 40 EFKA AB60D1472 Mode 7 (overlock) parameter 232 = OFF (tape cutter) / parameter 018 = OFF (seam end with pedal in pos. –2 and stop) without light barrier 5 6 7 8 9 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 <...
  • Page 41 EFKA AB60D1472 Mode 8 (backlatch Pegasus) POS.1 ST2/20 POS.2 ST2/21 ST2/35 /PED ST2/37 /PED ST2/28 /PED ST2/27 ST2/32 in3 (N.AUTO) ST2/6 in1 (LSP) ST2/7 0251/ M O D E- 8 Mark Function Parameter Control Mode 8 290 = 8 Basic position 2...
  • Page 42 EFKA AB60D1472 Mode 9 (backlatch Yamato) without light barrier POS.1 ST2/20 POS.2 ST2/21 ST2/35 /PED ST2/37 /PED ST2/28 /PED ST2/27 ST2/32 (LSP) ST2/7 (n12) ST2/6 (n9) ST2/8 0251/ M O D E- 9 Mark Function Parameter Control Mode 9 290 = 9...
  • Page 43 EFKA AB60D1472 Mode 9 (backlatch Yamato) with light barrier POS.1 ST2/20 POS.2 ST2/21 ST2/35 /PED ST2/37 /PED ST2/28 /PED ST2/27 ST2/32 in3 (N.AUTO) ST2/6 in1 (LSP) ST2/7 0251/ M O D E- 9a Mark Function Parameter Control Mode 9 290 = 9...
  • Page 44 EFKA AB60D1472 Mode 10 (lockstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA-R) ST2/37 (FA-V) ST2/28 kd3 kt3 (FW) ST2/27 (ML) ST2/32 0251/ M O D E- 10 Mark Function Parameter Control Mode 10 290 = 10 Softstart On Key S2 Thread trimmer and thread wiper On...
  • Page 45 EFKA AB60D1472 Mode 11 reversal of motor rotation with pedal in pos. -2 1/ 2 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 (ML) ST2/27 ST2/32 (N.POS) ST2/7 0251/ M O D E- 11 Mark Function Parameter Control Mode 11 290 = 11...
  • Page 46 EFKA AB60D1472 Mode 12 reversal of motor rotation with key in3 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 (ML) ST2/27 ST2/32 (N.POS) ST2/6 ST2/7 0251/ M O D E- 12 Mark Function Parameter Control Mode 12 290 = 12 Key for positioning speed...
  • Page 47 EFKA AB60D1472 Mode 13 (lockstitch / Pfaff 1425) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 FSE FSA (FSPL) ST2/28 (FW) ST2/27 ST2/32 (DB1) ST2/8 0251/ M O D E- 13 Mark Function Parameter Control Mode 13 290 = 13 Stop for thread trimmer depending on angle...
  • Page 48 EFKA AB60D1472 Mode 13 (lockstitch / Pfaff 1425) special function POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 (FSPL) ST2/28 (FW) ST2/27 B4/1 0251/ M O D E- 13a Mark Function Parameter Control Mode 13 290 = 13 Number of reversing increments...
  • Page 49 EFKA AB60D1472 Mode 14 (lockstitch) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 ST2/28 (FW) ST2/27 ST2/32 0251/ M O D E- 14 Mark Function Parameter Control Mode 10 290 = 10 Softstart On Key S2 Thread trimmer and thread wiper On...
  • Page 50 EFKA AB60D1472 Mode 17 (stitch lock Pegasus) POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 ST2/28 ST2/27 ST2/32 0251/ M O D E- 17 Mark Function Parameter Control Mode 17 290 = 17 Thread trimmer and thread wiper On Key S3 Positioning speed...
  • Page 51 EFKA AB60D1472 Mode 18 (Bottoms Overlock) 0 3 4 POS.1 ST2/20 POS.2 ST2/21 ST2/35 ST2/37 (AH) ST2/28 ST2/27 ST2/32 0251/ M O D E- 18 Mark Function Parameter Control Mode 18 290 = 18 Automatic sewing foot after light barrier sensing with...
  • Page 52 EFKA AB60D1472 Further Descriptions of Settings If Parameter 290 Is Set to “18“ (Mode 18)! Functions Before Beginning the Seam: LED 1 2 3 5 6 7 8 K L2281 Key S2 on the control: softstart On/Off. Key S3 on the control does not have any effect.
  • Page 53 EFKA AB60D1472 Mode 19 (lockstitch Macofrey) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA-R) ST2/37 (FA-V) ST2/28 (FW) ST2/27 (ML) ST2/32 0251/ M O D E- 19 Mark Function Parameter Control Mode 19 290 = 19 Softstart On Key S2 Thread trimmer and thread wiper On Key S3 Signal “backtacking”...
  • Page 54 EFKA AB60D1472 Mode 20 (lockstitch Juki LU1510-7) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 FSE FSA (FSPL) ST2/28 (FW) ST2/27 ST2/32 (Bit ST2/6 in4 (Bit 1) ST2/8 0251/ M O D E- 20 Mark Function Parameter Control Mode 20 290 = 20...
  • Page 55 EFKA AB60D1472 Mode 22 (lockstitch / Brother model B-891) POS.1 ST2/20 POS.2 ST2/21 ST2/35 (FA) ST2/37 FSE FSA (FSPL) ST2/28 (FW) ST2/27 ST2/32 0251/ M O D E- 22 Mark Function Parameter Control Mode 22 290 = 22 Softstart On...

  • Page 56: List Of Parameters

    EFKA AB60D1472 6 List of Parameters 6.1 Preset Values Depending on Mode The preset values which are different in the various modes are listed in the table below. When switching the mode using parameter 290, these values change automatically. Operator Level...
  • Page 57 EFKA AB60D1472 Supplier Level Mode Parameter - OFF Basic pos. Note The preset values of the following list of parameters refer to the setting of parameter 290 = 0. x = The positions marked with ”x“ are not used in the functional sequence! = For the positions marked with “-“...

  • Page 58: Operator Level

    EFKA AB60D1472 6.2 Operator Level The preset values of the following list of parameters refer to the setting of parameter 290 = 0. Parameter Designation Unit Preset Ind. c2 - Stitch counting stitches - End counting limited speed until stop...

  • Page 59: Technician Level

    EFKA AB60D1472 6.3 Technician Level Code no. 190 with control operation Parameter Designation Unit Preset Ind. SSc Number of softstart stitches stitches n1 Positioning speed n2 Upper limit setting range of the maximum speed RPM 9900 4000 n3 Stitch counting speed at the start of the seam...
  • Page 60 EFKA AB60D1472 Technician Level Code no. 190 with control operation Parameter Designation Unit Preset Ind. Speed status for the seam with stitch counting 0 = Speed controllable by the pedal up to the set maximum speed (parameter 111) 1 = Fixed speed (parameter 118) without influence by the pedal.
  • Page 61 EFKA AB60D1472 Technician Level Code no. 190 with control operation Parameter Designation Unit Preset Ind. 0 = Signal high lift for walking foot Off 1 = Signal high lift for walking foot at output M1 2 = Signal high lift for walking foot at output M2...
  • Page 62 EFKA AB60D1472 Technician Level Code no. 190 with control operation Parameter Designation Unit Preset Ind. Sr5 Control program number with index and identification number. Upon pressing the appropriate key the data will be displayed in succession. Control display: Press the E key Display e.

  • Page 63: Supplier Level

    EFKA AB60D1472 6.4 Supplier Level Code no. 311 with control operation Parameter Designation Unit Preset Ind. t2 Sewing foot lift switch-on delay with half heelback t3 Start delay after switching off the sewing foot lift signal t4 Time of full power of sewing foot lifting t5 Holding power for sewing foot lifting Stages 0...7...
  • Page 64 EFKA AB60D1472 Supplier Level Code no. 311 with control operation Parameter Designation Unit Preset Ind. in1 Selection of the input functions on socket ST2/7 and B4/1 for input 1. A value is preset for a number of modes. See chapter “Preset Values Depending on Mode”...
  • Page 65 EFKA AB60D1472 Supplier Level Code no. 311 with control operation Parameter Designation Unit Preset Ind. 39 = No function 40 = No function 41 = No function 42 = No function 43 = Needle up with subsequent sewing foot lifting with pedal in pos.
  • Page 66 EFKA AB60D1472 Supplier Level Code no. 311 with control operation Parameter Designation Unit Preset Ind. FAM 0 = Lockstitch mode: (FA1, FA2, FA3, FA1+FA2); e. g. Brother Dürkopp Adler, Mitsubishi, Pfaff, Toyota Lockstitch mode: e. g. Singer (SN62AV) Lockstitch mode: e. g. Singer (212 UTT) 3...=...

  • Page 67: Error Displays

    EFKA AB60D1472 7 Error Displays General Information On the control Signification Pedal not in neutral position, when turning the machine on (according to setting of parameter 233) Machine run blockage Light barrier monitoring Bobbin thread monitor Programming Functions and Values (Parameters)
  • Page 68 3715 NORTHCREST ROAD – SUITE 10 – ATLANTA – GEORGIA 30340 PHONE: (770) 457-7006 – TELEFAX: (770) 458-3899 – email: efkaus@bellsouth.net ELECTRONIC MOTORS SINGAPORE PTE. LTD. 67, AYER RAJAH CRESCENT 05-03 – SINGAPORE 139950 PHONE: +65-67772459 – TELEFAX: +65-67771048 – email: efkaems@efka.net 2(2)-300804 B (402290 EN)

Table of Contents