Sony KLV-S23A10E Service Manual page 13

Timer menu
Timer
Sleep Timer Off
Clock Set 20. 8. 2005 Fri 21:30
Timer
Select: Set: OK Back: End: MENU
Sleep Timer
Sets a period of time after which the TV automatically switches itself into the standby mode.
1
Press OK to select "Sleep Timer".
2
Press m/M to select the desired time period ("30min"/"60min"/"90min"/
"120min"), then press OK.
The indicator on the TV (front) lights up in amber.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off."
• "Sleep timer will end soon. Power will be turned off." appears on the screen one minute before
the TV switches to the standby mode.
• If you press / , the remaining time in minutes before the TV switches to the standby mode
is displayed on the screen.
Clock Set
1
Press OK to select "Clock set".
2
Press m/M to select the day, then press ,.
3
Set the month, year, and hour in the same way as in step 2.
4 Press m/M to select the minute, then press OK. </,
The clock starts.
Timer
Sets a predefined period of time after which the TV automatically switches on/off.
1
Press OK to select "Timer".
2 Press m/M to select "Set", then press OK.
3
Press , to select the desired period ("One Day", "Daily", "Mon-Fri" or
"Weekly"), then press OK.
4 Press m/M to select "On Time" or "Off Time", then press OK.
5
Press m/M to active. Press ,, then press m/M/</, to set time you
wish to switch on/off the TV. Press OK to confirm.
You can select the options listed below on the Timer
menu. To select options, see "Navigating through
menus" (page 19).
Set Up menu
Set Up
Auto Start Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Select: Set: Back: End:
OK MENU
Auto Start Up
Starts the "first time operation menu" to tune in all the available digital and analogue
channels. Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed (page 13). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
1
Press OK to select "Auto Start Up".
2
Press OK to select "Yes."
The auto-tune display appears on the screen.
3
Follow steps 1 to 4 of "Auto-tuning the TV" (page 13).
Auto Tuning (Analogue mode only)
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for a new channels that have been
launched by broadcasters).
1
Press OK to select "Auto Tuning".
2
Follow step 1 and 2 of "Auto-tuning the TV" (page 13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
Programme Sorting (Analogue mode only)
Changes the order in which the analogue channels are stored on the TV.
1
Press OK to select "Programme Sorting".
2
Press M/m to select the channel you want to move to a new position,
then press OK.
3
Press M/m to select the new position for your channel, then press OK.
Repeat the procedure in steps 2 and 3 to move other channels if required.
You can select the options listed below on the Set Up
menu. To select options, see "Navigating through
menus" (page 19).