Learning Resources Time Tracker LER6999 Use And Care Instructions Manual page 3

G. Green Tag
F. Red Tag
P. Tag Mode
Buttons (3)
Base Power & Audio Alarm turns the Base Unit on and activates the Tags.
This switch also controls the audio-alarm volume level for the Base Unit.
Base Display shows the time and mode assigned to each Tag.
Hours, Minutes, and Seconds assign time amounts to a selected Tag on the
Base Display.
Tag Mode Buttons select and assign programming modes for each Tag.
The color of the Tag Mode button matches its corresponding Tag and Tag Dock.
Tag Status Lights indicate the status of each Tag.
The color of the status light matches its corresponding Tag and Tag Dock.
Stop resets docked Tags in COUNTDOWN mode to their last programmed time.
The Stop button also stops and marks the time for docked Tags in COUNT-UP mode.
H. Yellow Tag
N. Hours
O. Tag Status
Lights (3)
K. Base Display
L. Seconds
M. Minutes
I. Stop
J. Base Power &
Audio Alarm
Volume
1