Salray Works SHARON 360 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Model: SHARON 360

High Bandwidth Full NDI

PTZ Video

Camera

User Manual

Ver 2. 00

Table of Contents

Summary of Contents for Salray Works SHARON 360

Page 1 Model: SHARON 360 ® High Bandwidth Full NDI PTZ Video Camera User Manual Ver 2. 00...
Page 2: Table Of Contents
Contents Caution ............................4 Introduction ............................6 Features Products & Accessories Ceiling Mount Bracket (ZCB-100) Installation Wall Mount Bracket (ZWB-200) Installation Installation ............................11 ① Camera Category-CLASS Setup ② Camera Address-ADRESS Setup ③ Communication Protocol-PROTOCOL Setup ④ Output Video Format-SYSTEM SELECT Setup ⑤...
Page 3 ➍ Picture ➎ Image ➏ Motion/Action Motion PT Speed Setup Home Position Setup North Direction Setup Preset Setting Edit Scene- Preset Setup Edit Label-Preset Setup Swing Setup Pattern Setup Group Setup Edit Group-Group Setup Parking Action Setup ➐ Display Setup Area Label Setup Edit Scene Edit Label...
Page 4: Caution
Caution Caution Don’t open. There may be electric shock. To avoid the risk of electric shock, do not arbitrarily open the cover or disassemble the <Caution> product. There are no user serviceable replacement parts. Get service from qualified service personnel. This lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insulated "dangerous voltage"...
Page 5 Safety Precautions Read all of the safety and operating instructions before using the product. Save these instructions for future reference. Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause hazards, damage product and void warranty. Do not use this product near water or moisture.
Page 6: Introduction
Introduction Features Optical x20/30 Zoom Lens 1/2.8inch, 2.38 mega pixels “Exmor” CMOS Sensor Sony Zoom Module Installed. Supports Max. x240(P-NA20, P-NA20S, P-NA20, P-NA20S), x360(P-NA30, P-NA30S, P-NA30, P-NA30S) including digital x12 zoom Full HD Output Format Various format of HD video output is available and Max. 1920x1080p60 is supported. 1080p 60/59.94/50/30/25 1080i...
Page 7 Smart Flip Function This function extends the shooting range by setting the camera to flip the image automatically when it tilts over 90°. → When Smart Flip function is enabled, letter will be shown in the display. Infrared Cut Filter (IR CUT-Filter) applied To improve the sensitivity by keeping the light absorption time longer at low light level such as at night, Slow shutter function and Day &...
Page 8: Products & Accessories
Products & Accessories l Basic Components Camera IR remote (with battery) Camera Bracket Screw User Manual AC Adapter 1m RJ45 Cable(Direct) 232C to UTP Cable RJ45 to RJ45 Cable Camera Bracket Ceiling Bracket Camera body/ Ceiling Ceiling Bracket Screw Plastic Anchor Bracket Screw User Manual...
Page 9: Ceiling Mount Bracket (Zcb-100) Installation
Ceiling Mount Bracket (ZCB-100) Installation l Ceiling bracket installation method 1) Fix the ceiling bracket on the ceiling using the screws 2) Attach the bracket to the camera body as shown in the (4EA). picture using the camera bracket and screws (4EA). 3) Insert the camera bracket into the ceiling bracket's 4) Tighten the screws (4EA) on all four sides to fix the groove as shown in the picture.
Page 10: Wall Mount Bracket (Zwb-200) Installation
Wall Mount Bracket (ZWB-200) Installation l ZWB-200 Components (Optional) Cover Camera bracket Wall bracket Plastic anchor (For Wall bracket screws Camera screws Bracket screws fastening wall screws) l Installation Method 2) Attach the bracket to the camera 3) Insert the camera bracket into the 1) Fix the Wall bracket on the wall body as shown in the picture using the wall bracket's groove as shown in the...
Page 11: Installation
Installation SHARON 360 ① ② ③ ④ ⑤ Communication Type Input Port Output Port Power Power Switch ® High Bandwidth NDI PTZ Video Camera...
Page 12: ① Camera Category-Class Setup
① Camera Category-CLASS Setup Used to set total 210 camera IDs, 14 Camera address for each CLASS using the CLASS of the camera. - Max. 15 CLASSes can be set to control multiple same camera IDs. ※ Number 0 is the same with CLASS OFF. - Factory default CLASS is OFF (Number 0).
Page 13: ② Camera Address-Adress Setup
② Camera Address-ADRESS Setup Change the Camera ID as shown below. - Up to 14 addresses can be set to control multiple cameras. ※ Do not use Number and 15(F). - Factory default is set to 1. When operating multiple cameras with the controller, set the different ID for each camera.
Page 14: ③ Communication Protocol-Protocol Setup
③ Communication Protocol-PROTOCOL Setup Change the communication protocol as shown below. : Factory Default Protocol BAUDRATE Switch 9600 bps VISCA 38400 bps 2400 bps PELCO-D 9600 bps 38400 bps 4800 bps PELCO-P 9600 bps Set the protocol correspond to the controller. Be sure to change the protocol while the power is off.
Page 15: ⑤ Communication Type-Communication Setup
⑤ Communication Type-COMMUNICATION Setup (OFF: / ON: Down) Set the RS-422 or RS-485 by turning on and off the DIP Swich No.1. Set the Parallel and Daisy of the RS-422 by turning on and off the DIP Swich No.2. The RS-232C communication is available without setting the DIP Switch separately.
Page 16: ⑥ Connection
⑥ Connection Connect a controller that transmits and receives PTZ control commands. ● RS-232C Connection(Mini DIN 8Pin Connector, RJ45 Connector) Sample 1. Connection of Controller and Camera User Manual...
Page 17 * Connect the 232 IN / 232 OUT cable using the direct LAN cable. 2. Multiple Camera Connection * Connect the 232 IN / 232 OUT cable using the direct LAN cable. ® High Bandwidth NDI PTZ Video Camera...
Page 18 ● RS-422 Connection 1. PARALLEL Connection Used when the cameras connected to the controller are all K-M series or P-N/P-NA series. In the case of the PARALLEL connection, when multiple cameras are connected, all the cameras operate normally even if some cameras don’t have power. ●...
Page 19 < When connecting more than 4 Cameras > When using the KTM-200Y Sample Multiple camera connection ® High Bandwidth NDI PTZ Video Camera...
Page 20 2. DAISY Connection Used when there is any of the cameras connected to the controller is not the K-M series or P- N/P-NA series. Connect the camera last, not the K-M series or P-N/P-NA series. For DAISY connection, be sure to turn on all the cameras. Sample User Manual...
Page 21: ⑦ Installation Check
⑦ Installation Check Before supplying power, make sure that there is no abnormality in wiring. Check the camera ID you want to adjust and then select the correct camera ID on the controller. You can check the camera ID on the screen or ID setting switch. If the controller supports multiple protocols, match them with the protocol set in the camera.
Page 22: Ndi Finder Appilcation
NDI Finder appilcation BASIC NDI finder apps can be downloaded by visiting the download center of Salrayworks' homepage as below. http://salrayworks.com/index.php/download-center/. Both the Window version and the MAC version are valid. After installation, the NDI Finder icon appears on the desktop. User Manual...
Page 23 Clicking the NDI ICON runs NDI finder apps as below The main purpose of NDI finder is to automatically search and acquire SHARON's NDI Devices’ full IP information in the local network. And if you lose the login password of each web server of SHARON NDI devices, you could initialize for reset Password, if you forgot PW.
Page 24 6. Camera Reboot Initialize the admin account and password. After that, access the web page and reset the ID and password. User Manual...
Page 25: Ndi Web-Server
NDI Web-Server If SHARON PTZs exists on the same network, you can access the web server through Chrome or another browser (Internet explorer, Edge) and Enter 192.168.0.120 with a browser address and you will see the set password window as below. Set Password When you access the web server of SHARON NDI for the first time, the ID and password setting window appears.
Page 26 Control In the control menu, the pen tilt of SHATON PTZ can be adjusted and up to 100 position values can be saved. The value can be freely adjusted by selecting the focus or exposure automatically or manually. Auto, Indoor, Outdoor, and Manual modes can be selected in White Balance menu. User Manual...
Page 27 System In the system menu, you can monitor the name, address, or information of the currently discovered Sharon device, the CPU, GPU, and network hatch of the current system. You can now monitor the video resolution of the Sharon PTZ camera and adjust the audio line or mic value. (The resolution can be changed by turning off the power and using the deep switch on the back of the SHARON camera.
Page 28: Main Features
Main Features Screen Menu While viewing the menu displayed on the connected monitor, you can change various status settings such as camera shooting conditions, system settings, information, and functions. IR Remote RM-KA100 RM-KA200 DATA SCREEN GO to MENU or EXIT Top button of the Joystick Button or HOME/SET...
Page 29 PELCO D/P Preset 255 When using VISCA protocol, pattern, swing, group will be carried out in each range from 1 to 8. When using PELCO D/P protocol, preset will be carried out in its range from 131 to 160 and 95. Preset 95 allows you to enter MENU.
Page 30: Swing
SWING Swing function allows you to make camera move between 2 preset positions repeatedly. When swing function activates, the camera moves from the first preset to the second preset position, and then from the second preset position to the first preset position. If you push other buttons or move joystick, swing will stop running.
Page 31: Group
GROUP Group function is a function that repeatedly activates preset combinations of the preset, swing, and pattern functions. Max. eight groups can be assigned, and each group can set up to 20 actions (presets, swings, patterns). The presets set in the group can specify the operation speed, and pattern and swing can specify the number of repetitions.
Page 32: Other Functions
"Wait Time" can be set to a value from 1 minute to 4 hours. Other Functions Menu Function OSD(On Screen Display) Configuration Displays preset name during preset operation. Preset Label Displays the image flip status by Smart Flip function. Smart Flip Displays the current Camera ID.
Page 33: Main Menu
Main Menu : Controls focus and zoom. Focus/Zoom Full HD Motion Video Camera : Sets the White Balance. White Balance ☞<Focus/Zoom > <White Balance> <AE Mode> : Sets exposure value by selecting brightness, AE Mode <Picture> aperture, and shutter speed. <Image>...
Page 34: ➋ White Balance
➋ White Balance Calibrates the colors for better reproduction based on the exact white color under the various light sources. : Auto and ATW are set automatically, and Sodium is set Mode White Balance based on sodium, etc. In Manual mode, the camera ☞Mode Auto chromaticity (Red / Blue Gain) is set manually.
Page 35: ➍ Picture
➍ Picture Configures general settings of the camera’s exposure. : Set ON to set Slow Shutter automatically in dark Slow Shutter Picture environment. It operates when AE Mode is Full Auto. [On/ ☞Slow Shutter Off] : Used to set the BLC(Back Light Compensation) function HR Mode to make the subject and background clear at the same time Image Stabilizer...
Page 36: ➏ Motion/Action
: Adjusts the sharpness of the image. [0~15, default 10] Aperture : During preset operation, used to stop the image before movement and restores Freeze in Preset the image after movement. [On/ Off] ➏ Motion/Action : Sets the general motion operation settings. Motion Motion/Action : Sets the general preset operation settings.
Page 37: Pt Speed Setup
PT Speed Setup Sets the operation speed related to Jog, Preset and Home position movement. : Used to set the maximum operation speed. PT Max Speed PT Speed The operation speed is linked to the zoom magnification (PT with Zoom ON), so the larger the zoom magnification, the ☞PT Max Speed 60/sec PT with Zoom...
Page 38: Preset Setting
Preset Setting : Select the preset number you want to set. If you Preset No. Preset select a predefined preset number, preset move is performed ☞Preset No. and the set label is displayed. If the selected preset is not Undefined defined, "Undefined"...
Page 39: Swing Setup
Swing Setup : Select the swing number to be set. If the selected Swing No. Swing swing number is not set, Start Used and End Position are ☞Swing No. displayed as "Not Used". [1~8] Start Position Preset1 End Position Not Used : Set two positions for swing Start Position / End Position Undefined...
Page 40: Group Setup
Group Setup : Used to select the group number to set. If the Group No. selected group is not defined, "Undefined" is displayed below Group the group number. [1~8] ☞Group No. Undefined : Used to delete the current group setting. Clear Group Clear Group Cancel...
Page 41 1. Press the SET or joystick top button in the "No" item to start group setup. 2. You can set 20 items in 1 group. Use UP/DOWN to move to the desired item number and press the SET or the ENTER button on the joystick to edit the item.
Page 42: Parking Action Setup
Parking Action Setup This function automatically executes the specified operation when the camera is not operated during the set "Wait Time". : Used to set the activation of the Parking Action Park Enable 424242424242424242424242 function. [On/Off] 424242424242424242424242 : It is displayed as "hour: minute: second" and can 424242424242424242424242 Wait Time be set in minutes or more.
Page 43: Area Label Setup
Area Label Setup It is a function that sets a specific area and its label to display the label on the main screen when the camera is move to the corresponding area. : Displays the set Area Label. If set to Auto, it is Display displayed during operation.
Page 44: Edit Scene
Edit Scene You can pan the camera only in a clockwise direction. When setting the 444444444444444444444444 setting area, Image Flip is automatically set to Off. After completing the 444444444444444444444444 setting, Image Flip will return to the original setting value. Up to 16 areas 444444444444444444444444 can be set.
Page 45: Edit Label
Edit Label : Select the area number to be set. Area Label No.[1~16] If the selected area is not yet defined, Undefined displays under the area number. : Used to set the area label in the sub menu. Edit Area Label Max.
Page 46: ➑ System Info
➑ System Info. : Displays the model name of the camera. Camera Model 464646464646464646464646 : Displays the S/W version of the camera. CAM F/W ver. 464646464646464646464646 464646464646464646464646 : Displays the set Video Format. System Select 464646464646464646464646 ※ Check the output video format setting section. 464646464646464646464646 464646464646464646464646 : Displays the selected protocol.
Page 47: Additional Info
Additional Info. : Displays the camera’s zoom type. Camera Type 474747474747474747474747 : Displays the camera’s zoom version. Camera ver. 474747474747474747474747 474747474747474747474747 : Displays the number of Pan rotations. Pan Rotation 474747474747474747474747 System Initialize : Used to initialize the settings to the factory default or 47474747474747474747 reboot the system.
Page 48: Ir Remote Control
IR Remote Control User Manual...
Page 49 : Turn On/ Off the camera 1. POWER : Enter menu or exit menu. 2. MENU : Select to operate, set, or save. 3. PRESET/SWING/PATTERN/GROUP 4. Number pad (0~9) - Used to set the camera ID to be controlled with the CAM button. - Used to select a number for operating, setting, or saving the selected preset, swing, pattern, and group.
Page 50 ⓐ Press the CAM button for about 3 seconds. ⓑ Check that the LED of the PRESET button blinks for about 2 seconds and then lights up. ⓒ Select the ID number of the camera to be controlled. ⓓ Press the CAM button again. ⓔ...
Page 51 : Used to initialize the Pan and Tilt of the camera. 20. P/T RESET Used when the direction of camera is changed due to external shock. ® High Bandwidth NDI PTZ Video Camera...
Page 52: Controller ( Coming Soon )
Controller ( Coming soon ) l CK-200, Controller for the K-M series and SHARON series Compact type keyboard controller Up to 4 cameras can be controlled LAN JACK support for convenient installation 422 communication interfaces LCD Display Variable speed control of PAN/TILT/ZOOM using the Joystick Easy control check through LED on each button Improved switch sensitivity by applying tact switch * For more information, refer to the RM-KA100 manual...
Page 53 l CK-200, Controller for the SHARON, KM/KS. PTZ Camera series Max. 14 Pan/Tilt/Zoom cameras can be controlled. Two-way remote control is supported by using RS-232C and RS-422 communication, and the camera operation status can be checked by button and LCD. Supports VISCA protocol.
Page 54: Problem Solving
Problem Solving If an error occurs in the camera, check the following. If the problem persists after checking, please contact the distributor from whom you purchased this product. Problem Check Make sure that the power of this product and the monitor are connected. Make sure that the video cable is connected correctly.
Page 55: Menu Structure
Menu Structure You can check the all-menu structure. Please refer to the relevant page for more detailed function and usage. * Bold letters indicate default values. Main menu Submenu Submenu Submenu Submenu Focus Mode Semiauto/ Auto/ Manual 1cm/ 11cm/ 30cm/ 0.8m/ 1.2m/ Focus Near Limit 1.4m/ 1.65m/ 2.0m/ 2.5m/ 3.1m/ 4.2m/ 6m/ 10m/ 20m/ Over Inf...
Page 56 Preset No. 1~255 Clear Preset Cancel/ Ok <Edit Scene> <Preset> <Edit Label> <Camera Mode> Preset Speed 360/sec Swing No. Start Position Preset 1~255 End Position Preset 1~255 <Swing> 30/sec, Swing Speed 1~180/sec Clear Swing Cancel/ Ok Pattern No. <Pattern> Clear Pattern Cancel/ Ok <Edit Pattern>...
Page 57: Default Value
Default Value Menu category Saved Presets Setting value Default Value Camera setting value Focus Mode ● Semiauto Focus Near Limit ● 0.8m AF Sensitivity ● Normal Digital Zoom ● Zoom Speed ● White Balance - Mode ● Auto Red Gain ●...
Page 58 User setting value Preset 1~ 255 Undefined Swing 1~8 Undefined Pattern 1~8 Undefined Group 1~8 Undefined Motion setting Value Action Lock ❍ Power Up Action ❍ Smart Flip ❍ PT Direction Normal ❍ Preset Speed 360/sec ❍ PT Max Speed 60/sec ❍...
Page 59: Specifications
Specifications Model SHARON 20 SHARON360 SHARON30 Module 1/2.8 Type "Exmor R" CMOS Sensor Sony Zoom Module Valid pixels 1920[H]x1080[V] (Approximately 2.38 million pixels) 1920x1080p60, 1920x1080i60, 1920x1080p30, 1280x720p60, 1280x720p30, Video output 720x576i50(CVBS only), 1920x1080p59.94, 1920x1080i59.94, 1280x720p59.94, 1920x1080p50, format 1920x1080i50, 1920x1080p25, 1280x720p50, 1280x720p25 HD/3G-SDI HD/3G-SDI HD/3G-SDI...
Page 60 Defog Mode Off/ Low/ Mid/ High High Sensitivity Off/ On Noise Reduction Off/ 1~5 Aperture 10, 0~15 Auto/ Indoor/ Outdoor/ One Push/ ATW/ Manual/ Outdoor Auto/ Sodium Auto/ Sodium/ Sodium White Balance Out Auto Program AE Full Auto/ Bright/ Shutter Pri/ Iris Pri/ Manual On/ VE Off/ On/ VE Off/ On...
Page 61 *ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. * NDI® are registered trademarks in the United States and other countries by NewTek. ® High Bandwidth NDI PTZ Video Camera...
Page 62: Dimension
Dimension l PTZ Camera ( SHARON 360 ) User Manual...
Page 63 l Ceiling Bracket (ZCB-100) ® High Bandwidth NDI PTZ Video Camera...
Page 64 l Wall Bracket (ZWB-200)(Optional) User Manual...
Page 65: Glossary
Glossary w HD-SDI(High Definition-Serial Digital Interface signal) The digital video interface with 1.5 Gb/s transfer rate is standardized in SMPTE 292M. It supports 1080i /59.94 signals and can transmit signals up to 208M (stable distance 145.6M) when coaxial cable is connected. The advantages of HD-SDI include no signal delay, video and audio reporting, and time code signals.
Page 66 software based rather than using hardware (lens), image quality deteriorates. It is commonly used as a supplement to optical zoom. w BAUDRATE It is the data transmission rate which indicates how many bits are transmitted per second to communicate. If the baudrate is 9600 bps, it means that 9600 bits are transmitted per second.
Page 67: Index
Index Ａ Action Lock ................................30, 31 Action Title ..................................36 Additional Info ................................40 AE Mode ..................................28 AF Sensitivity .................................. 27 Aperture ..................................29 Area Label ..................................36 ATW ....................................57 Ｂ BAUDRATE ..................................58 BLC ....................................29 Ｃ...
Page 68 Ｍ Mecha F/W ver................................40 Ｎ Noise Reduction ................................29 North Direction ................................30 Ｏ ONE PUSH ..................................57 Ｐ Parking Action ................................25 PELCO D/P ..................................57 Picture Effect .................................. 29 Power Up Action ................................25 Preset Label ..................................36 PT Direction ..................................
Page 69 Unit 905, 1126 Bemon-ro, Geumchon-gu, Seoul, Korea 08595, +82 2 2626 6425, anyhelp@salrayworks.com www.salrayworks.com...