Dell EMC PowerEdge R650xs Reference Manual page 20

Table 22. System Security details (continued)
Option
SGX QoS
Select Owner EPOCH input type
Enable writes to
SGXLEPUBKEYHASH[3:0] from
OS/SW
Enable/Disable SGX Auto MP
Registration Agent
SGX Factory Reset
Power Button
AC Power Recovery
AC Power Recovery Delay
User Defined Delay (60 s to 600
s)
UEFI Variable Access
In-Band Manageability Interface
20 Pre-operating system management applications
Description
Enables or disables the SGX quality of service.
Enables you to select Change to New random Owner EPOCHs or Manual User
Defined Owner EPOCHs. Each EPOCH is 64-bit. After generating new EPOCH by
selecting Change to New random Owner EPOCHs, the selection reverts back to
Manual User Defined Owner EPOCHs.
Software Guard Extensions Epoch n: Sets the Software Guard Extensions Epoch
values.
Enables or disables the Enable writes to SGXLEPUBKEYHASH[3:0] from OS/SW.
SGX LE Public Key Hash0: Sets the bytes from 0-7 for SGX Launch Enclave Public
Key Hash.
SGX LE Public Key Hash1: Sets the bytes from 8-15 for SGX Launch Enclave Public
Key Hash.
SGX LE Public Key Hash2: Sets the bytes from 16-23 for SGX Launch Enclave Public
Key Hash.
SGX LE Public Key Hash3: Sets the bytes from 24-31 for SGX Launch Enclave Public
Key Hash.
Enables are disables the SGX Auto MP Registration. The MP registration agent is
responsible to register the platform.
Enables you to reset the SGX option to factory settings. This option is set to Off by
default.
Enables or disables the power button on the front of the system. This option is set to
Enabled by default.
Sets how the system behaves after AC power is restored to the system. This option is
set to Last by default.
NOTE: The host system will not power on up until iDRAC Root of Trust (RoT) is
completed, host power on will be delayed by minimum 90 seconds after the AC
applied.
Sets the time delay for the system to power up after AC power is restored to
the system. This option is set to Immediate by default. When this option is set to
Immediate, there is no delay for power up. When this option is set to Random, the
system creates a random delay for power up. When this option is set to User Defined,
the system delay time is manually to power up.
Sets the User Defined Delay option when the User Defined option for AC Power
Recovery Delay is selected. The actual AC recovery time needs to add iDRAC root of
trust time (around 50 seconds).
Provides varying degrees of securing UEFI variables. When set to Standard (the
default), UEFI variables are accessible in the operating system per the UEFI
specification. When set to Controlled, selected UEFI variables are protected in the
environment and new UEFI boot entries are forced to be at the end of the current boot
order.
When set to Disabled , this setting hides the Management Engine's (ME), HECI devices,
and the system's IPMI devices from the operating system. This prevents the operating
system from changing the ME power capping settings, and blocks access to all in-
band management tools. All management should be managed through out-of-band. This
option is set to Enabled by default.
NOTE: BIOS update requires HECI devices to be operational and DUP updates
require IPMI interface to be operational. This setting needs to be set to Enabled to
avoid updating errors.