Once account creation is complete,
click on OK:
The list of products linked to an account
appears.
Click on the
icon to continue.
Your Bluetooth must be activated.
If you have not already connected the camera
to your WiFi network, click "My device is not
connected to the Internet at this time".
Select the WelcomeEye View camera from the
list of products compatible with the application:
At this point your camera should be powered
up and ready to be linked. If not, reset as
instructed (by pressing and holding the reset
button for 3 seconds until you hear a beep and
then a melody) and wait until the camera is
ready. The camera emits 2 sets of 5 beeps when
it is ready to proceed.
Then click on "Next" .
WelcomeEye View / V1
7