Table of Contents
Advertisement
6.3. Detection alert
Your camera has two detection systems:
Motion detection in its field of vision and
recognition of human figures. You can use both
independently or simultaneously.
Motion detection settings:
The motion detection settings can be accessed
by clicking on
your camera settings. The camera looks for
moving areas in its field of vision and triggers
the alert depending on their size.
The sensitivity of the detection is determined
by the minimum size of the moving area for the
alert to be triggered:
• If sensitivity is low, only significant movements
within the camera's field of vision will trigger
an alert.
• If sensitivity is high, any motion, no matter
how small, will trigger an alert.
2
4
6
(Alarm settings) in
1
3
5
7
WelcomeEye View / V1
1
Movement detection activation
Activation of the notification if
2
movement is detected (you are warned
on your smartphone)
3
Detection sensitivity (see above)
Light switches on if movement
4
is detected and a light has been
connected to the camera
Alarm activation if movement is
5
detected
6
Program activation ranges (see below)
Record a video to the memory card if
7
movement is detected
You can activate motion detection manually
or automatically by programming times. If you
wish to activate automatically according to the
time of day, click on
and then choose a day of the week:
You can define up to 3 time slots with a start
and end time for the day, during which the
motion detection will be active.
(Alarm set)
11
Advertisement
Table of Contents
