Laney CUB10 Operating Instructions Manual page 9

Laney
INTRODUCTION
The Cub-10 is a straight forward easy to use tube combo
amplifier, featuring 2 x ECC83/12AX7 preamp tubes and 2 x
6V6GT output tubes.
Its 10W Class A/B Push/Pull circuitry pumps out classic tube
tones through a 10" Celestion speaker.
The Chocolate Brown front panel features vintage style and
simplicity. After flicking ON the chrome toggle switch, set the
tone and volume controls, wind up the gain and you are ready
to Rock.
The cabinet is finished in black leather grain vinyl and features
built in mains lead storage on the rear grille and a comfortable
soft grip handle for easy transportation.
Moving round to the rear panel, there is a 8-16 Ohm extension
cabinet socket, to which any of the cabinets in the Laney range
can be connected - let your Cub get its claws out with one of
the Laney GS412 range and really entertain the neighbours!
We hope you get a kick out of using your Cub-10, we certainly did designing and making it.
Best wishes from all at Laney
Page
9 / 16