Specifications - DEDAKJ K-HF55e User Manual

4. Timing button: After turning on, press the "timing" button for the first time to
display the current remaining time; press the "timing" button again within 3
seconds to display the current timing minutes; each time you press it, the timing
is "0~60 minutes" Increment by 10 minutes in sequence, no operation within 3
seconds after the timing setting is activated, the timing is completed;
5. Disinfection button: Disable the UV disinfection lamp when it is turned on and
running. When the button is touched, the buzzer will sound 2 "DiDi" to indicate
that there is no response to the operation; in the standby state, press the
"Disinfection" button once to start the UV disinfection function , Timing 3
minutes, automatically shut down after 3 minutes of disinfection ;
6. Temperature + button: After powering on, press the "temperature +" key for the
first time to display the current "constant temperature setting value", and switch
to the real-time water temperature after 3 seconds; press the "temperature +" key
again within 3 seconds, and the setting temperature will increase by 1 If there is
no operation within 3 seconds, switch to real-time water temperature. The
highest temperature is 48℃;
7. Temperature - button: After powering on, press the "temperature-" key for the
first time to display the current "constant temperature setting value", and switch
to the real-time water temperature after 3 seconds; press the "temperature-" key
06
again within 3 seconds to set the temperature to decrease by 1 If there is no
operation within 3 seconds, switch to real-time water temperature. The lowest
temperature is 35°C.
S p e c i fi c a t i o n s
Product Model K-HF55e-A / K-HF55e-E
Product Name Foot Spa Bath Massager
Rated Voltage 110V~ / 230V~
Rated Frequency 60Hz / 50Hz
Rated Power 850W
Executive Standard EN55014 EN60335 FCC PART 15 B
The company reserves the right to change the product design without
prior notice.
Highest Temperature 48℃
Operating Method Touch Key Switch
Display Method LED Indicator
Heating Method
Pump pressure cycle heating
Thermal Efficiency Grade
>80%
07