Download
Share
Print this page
HID Omni-ID Custom ZT410 User Manual
  1. Manuals
  2. Brands
  3. HID Manuals
  4. Label Maker
  5. Omni-ID Custom ZT410
  6. User manual
HID Omni-ID Custom ZT410 User Manual

HID Omni-ID Custom ZT410 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
omni-id.com
Custom ZT410
Guide
User Guide

Advertisement

loading

Summary of Contents for HID Omni-ID Custom ZT410

  • Page 1 omni-id.com Custom ZT410 Guide User Guide...

  • Page 2: Table Of Contents

    omni-id.com Custon ZT410 Guide Contents Printer Setup Ribbons Printer Settings Print Troubleshooting Software Setup Note: the only Zebra printer that is suitable for printing and encoding On Metal RFID labels is the “Custom ZT410” printer that has been modified to accommodate the increased thickness of On metal RFID labels tags vs conventional labels. Attempts to use this guide with a regular ZT410 may result in various print issues, such as slipping and tag getting caught within the printer.

  • Page 3: Printer Setup

    omni-id.com Custon ZT410 Guide Printer Setup The photographs on the following pages will help to load label rolls in the printer correctly. 1. Load label spool and ensure lock in place with the 2. Slide Media Guide left until it is just touching edge Media Supply guide arm.
  • Page 4 omni-id.com Custon ZT410 Guide 4. Feed the labels under the Print Head Head pressure dials are located on top of the print head; these should be adjusted so that the print quality is consistent without applying excessive pressure. Print head pressure toggles 5.

  • Page 5: Ribbons

    omni-id.com Custon ZT410 Guide Omni-­ ‐ ID­recommends­using­a­high-­ ‐ quality­Resin­ribbon: Limited supply as standard with Ground Plane and Monza R6-P IC* Manufacturer Product Type B324 Multi-purpose Resin Thermal Transfer Omni- ID labels are compatible with full resin print ribbons. Load ribbon into the printer with matt surface visible to the human eye from the front of the printer.

  • Page 6: Printer Settings

    omni-id.com Custon ZT410 Guide Printer­Settings This chapter provides specific details and guidelines associated with encoding Omni- ID labels. Setup Printer settings, using main control panel. Optimize RFID encoding settings for Omni- ID labels. Printer Setup Menu Darkness: Darkness should be adjusted to achieve optimal print quality based on ribbon used.

  • Page 7: Print Troubleshooting

    omni-id.com IQ On Metal Labels User Guide and FAQ Regional­tag­–­IQ­350 Supplied as standard with Ground Plane and Monza R6-P IC Issue Possible Cause Solution Labels won’t feed Sensor location Sensor setting Media Re- locate sensor Check gap sensing in Calibration menu Re- calibrate media if necessary.
  • Page 8 Omni-ID is the leading supplier of passive, low-profile UHF RFID solutions. Through our patented technology, Omni-ID “cracked the code” to overcome the problems traditionally associated with RFID, enabling a broad range of new applications that improve accuracy and efficiency in asset tracking, supply chain management and work-in-process.