Xiaomi DDL-M1 Operating Instruction page 28

PROBLEM
The interface is not plugged tightly
The device cannot connect to the The data cable is damaged
computer software terminal The connecting cable with data
transmission function is not used
Ambient temperature changes
The lens showed a blurred image dramatically,causing the lens to fog
Specimens were observed with The specimen surface is dirty and the
foreign bodies and were not observation panel is dirty
observed clearly
The shell is broken and cracked Damage caused by external use
due to falling and impact
The product cannot be turned off or System halted
the buttons are malfunctioning
(Notice: When APP is connected to the microscope,please turn on the positioning permissions of mobile phone/tablet)
WHY
Plug interface again
Replace the data cable
Replace the data cable with data transmission
function before connecting to use
Wait for the temperature to stabilize,use it after
the fog disappears for a period of time
Wipe the specimen surface and observe the
surface of the panel
Man-made damage is not covered by the three
guarantees
Please plug in the power to reset and restart
SOLUTION
27