Sony DVW-A510 Operation Manual page 131

Item number Item
006 LOCAL FUNCTION
ENABLE
007 TAPE TIMER
DISPLAY
MONITORING
008
SELECTION FOR
VTR-TO-VTR
EDIT
009 CHARACTER
TYPE
011 CHARACTER
V-SIZE
CONDITION
CONDITION
012
DISPLAY ON
VIDEO
MONITOR
Settable range Function
Selects which buttons on the control panel are enabled,
0 all disable
when this unit is in the remote control mode.
[1] [stop eject]
&
0: All switches and buttons are disabled.
2 all enable
1: Only the STOP and EJECT buttons are enabled.
2: All switches and buttons except the RECORDER button
[0] [+/–12H]
Determines whether the CTL counter displays a 12-hour or
1 24H 24-hour clock.
0: 12-hour clock
1: 24-hour clock
[recorder only]
[0]
In two-VTR editing system when only one monitor is
auto switch
1 connected to the recorder, selects whether the recorder
automatically changes to E-E mode and outputs the player's
playback signal on the monitor whenever the recorder's
PLAYER button is pressed.
0: The recorder does not change to E-E mode.
1: The recorder change to E-E mode to and outputs the
[0] [white] Determines the type of superimposed characters output from
1 black the SERIAL V/A OUTPUT 4(SUPER) or VIDEO OUTPUT
2 W/out COMPOSITE 3(SUPER) connector.
3 B/out
0: White letters on a black background
1: Black letters on a white background
2: White outline letters
3: Black outline letters
×
[01] [ 1] Determines the vertical size of superimposed characters
× 2
02 output from the SERIAL V/A OUTPUT 4(SUPER) or VIDEO
× 3
03 OUTPUT COMPOSITE 3(SUPER) connector.
× 4
04
01: Standard size
02: Two times standard size
03: Three times standard size
04: Four times standard size
[0] [disable] Determines whether or not to include the display of the
1 enable channel condition with the superimposed characters.
0: Does not display the condition.
1: Displays the condition.
How the channel condition display format:
The condition is displayed below the timer or status line of
the characters. (The entire area for displaying the condition
is blank when an analog tape is inserted.)
Example: V– – – – A– – – –
The four characters following "V" indicate the condition of
each video channel from Ach to Dch of the rotary head.
The four characters following "A" indicate the condition of
each audio channel from Ach to Dch of the rotary head.
Character pattern
(Space): The condition is not indicated on the front panel
– : The condition is good (the green indicator lights up).
* : The condition is less than good (the yellow indicator
p : The condition is bad (the red indicator lights up).
and PLAYER button are enabled.
playback signal of the player.
(STBY OFF, etc.).
lights up).
A-9
Appendix