Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Conmec CT436E
Summary of Contents for Conmec CT436E
- Page 1 Operator's Manual Electrical Walk-behind Power Trowel CT436E...
- Page 2 Manufacturer Conmec Engineering Co., Ltd No.88, 2# Industrial Avenue, An Wu Road, Wu Qiao County, Feng Xian, Shanghai, P.R.C Tel: 86 (0)21 57407318 Fax: 86 (0)21 57406955 www.conmec.cn Original instructions This Operator’s Manual presents the original instructions. The original language of the Operator’s Manual is English.
-
Page 3: Foreword
Foreword This manual contains important instructions for this machine. These instructions must be followed during installation, operation, and maintenance of the machines. This manual provides information and procedures to safely operate. For your own safety and to reduce the risk of injury, carefully read, understand, and observe all instructions described in this manual. -
Page 4: Table Of Contents
Table of Contents Foreword Warranty 1. TECHNICAL DATA 1.1 Technical Specification…………………………………………………………………………….17 1.2 Dimension …………………………………………………………………………….……………18 2. SAFETY INFORMATION 2.1 Machine Description and Intended Use ………………………………………………….5 2.2 Operating Safety…………………………………………………………………………..5 2.3 Safety regarding operation of machine………......…………………..…..6-7 2.4 Electrical safety......................7 2.5 Service Safety ……………………………………………………………………………….7 2.6 Safety regarding maintenance..................8 2.7 Label Locations………………………………………………………………………………8 2.8 Labels Meaning …………….……………………………….…………………………….9-10... -
Page 5: Technical Specification
The power trowel with battery is available in operated with rechargeable battery pack. To find the specifications that apply to your machine, check the information plate on the machine. 1.1 Technical Specification: Model CT436E Motor type DC60V Motor speed r/min... -
Page 6: Safety Information
2. SAFETY INFORMATION 2.1 Machine Description and Intended Use This machine is a walk-behind concrete finishing trowel. It consists of a engine mounted frame, a electrical motor, a battery pack, a gearbox, a guard ring and a handle. This machine is intended to be used for floating and burnishing curing concrete. 2.2 Operating Safety Only trained personnel are permitted to start, operate, and shut down the machine. -
Page 7: Electrical Safety
Faults must be immediately rectified. Carry out the switch on, and switch off operations in accordance with this user guide. Before switching on the machine make sure that no-one can be endangered when the machine starts up. Never operate the machine when it’s in its upright position. -
Page 8: Safety Regarding Maintenance
2.6 Safety regarding maintenance Set the machine into the OFF position before beginning any work on the machine. Never work on the machine while power is still connected! All parts must have come to a complete stop before beginning any work! ... -
Page 9: Labels Meaning
2.8 Label Meanings Our machines use international pictorial labels where needed. These labels are described below: Label Meaning WARNING! Cutting hazard. Always replace blade guard! CAUTION! Read and understand the supplied Operator’s Manual before operating the machine. Failure to do so increase the risk of injury to yourself or others. -
Page 10: Preparing The Machine For First Use
3. OPERATION 3.1 Preparing the Machine for First Use 3.1.1 Make sure all loose packaging materials have been removed from the machine. 3.1.2 Check the machine and its components for damage. If there is visible damage, do not operate the machine! Contact dealer immediately for assistance. 3.1.3 Take inventory of all items included with the machine and verify that all loose components and fasteners are accounted for. -
Page 11: Operation
3.3 Installing the Blades There are three types of blades available for the trowels. Float pans are large style blades, which hook on over finish or combination blades, used in the earliest stages of work, and are not pitched. Finishing blades are used in the final stages of working, and are progressively pitched to burnish the concrete. -
Page 12: Handle Installation And Adjusting
3.5 Handle Installation and Adjusting 3.5.1 Un-pack the handle assembly and the lower unit from the boxes. Check to make sure no damage was done during shipment. Mount the handle assembly to the gearbox on the lower unit using 10mm nuts that are supplied in a package on the lower unit. 3.5.2 Pull the pitch control cable (A) from bottom end of the tube and remove the cable nut (B) from the cable. -
Page 13: To Stop
3.8 To Stop Reduce RPM to “0” by moving the speed control. Release the safety stop switch. Turn the key switch to “OFF”. 3.9 Speed Control The motor speed can be set on Auto and Manual mode. Speed Control on Auto: In Auto speed mode, adjust the motor speed suitable for real-time working conditions, clockwise to increase, counterclockwise to decrease MIN(0 min/n)~MAX(120 min/n). -
Page 14: Electrical Schematic
4. Electrical Schematic... -
Page 15: Maitenance
5 MAINTENANCE 5.1 Periodic Maintenance Schedule The chart below lists basic trowel and motor maintenance. Every Every Every Every Every Daily hours hours hours hours hours Check external hardware. Clean trowel after each use to remove concrete splatter. Grease blade arms ... -
Page 16: Lubrication
5.4 Lubrication The long life and successful operation of any parts of machinery is dependent on frequent and thorough lubrication. Before using the machine, always check the oil and use proper oil with the correct type and grade as recommended. NOTICE: DO NOT mix types of oil in gearbox and DO NOT overfill the oil. -
Page 17: Technical Data
5.6 Trouble Shooting SYMPTOM REMEDY The machine won’t start Check whether the power switch is turned on. Check the control circuit fuse. Check if the transformer secondary coil has 24V output. Check the safety stop switch. Check the relay ... - Page 18 CE-KONFORMITÄTSERKLÄUNG DECLARACIÓN DE CONFORMIDAD DE LA CE DÉCLARATION DE CONFORMITÉ C.E. CONMEC ENGINEERING CO., LTD NO.88, 2# INDUSTRIAL AVENUE, AN WU ROAD, WU QIAO COUNTY, FENG XIAN, SHANGHAI, P.R.C hereby certifies that the construction equipment specified hereunder /bescheinigt, da. das Bauger.t/ certifica que la máquina de construcción/atteste que le matériel :...
- Page 19 CONMEC ENGINEERING CO., LTD Add: No.88, 2# Industrial Avenue, An Wu Road, Wu Qiao County, Feng Xian, Shanghai, P.R.C Tel: 86 (0)21 57407318 Fax: 86 (0)21 57406955 E-mail: sales@conmec.cn www.conmec.cn Version: 202105-01...
Need help?
Do you have a question about the CT436E and is the answer not in the manual?
Questions and answers