Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Conmec CRT836-2
Summary of Contents for Conmec CRT836-2
- Page 1 Operator's Manual Ride-On Power Trowel CRT836 Series CRT846 Series...
- Page 2 Manufacturer Conmec Engineering Co., Ltd No.88, 2# Industrial Avenue, An Wu Road, Wu Qiao County, Feng Xian, Shanghai, P.R.C Tel: 86 (0)21 57407318 Fax: 86 (0)21 57406955 www.conmec.cn Original instructions This Operator’s Manual presents the original instructions. The original language of the Operator’s Manual is English.
-
Page 3: Foreword
Foreword This manual contains important instructions for this machine. These instructions must be followed during installation, operation, and maintenance of the machines. This manual provides information and procedures to safely operate. For your own safety and to reduce the risk of injury, carefully read, understand, and observe all instructions described in this manual. -
Page 4: Table Of Contents
Table of Contents Foreword Warranty 1. SAFETY INFORMATION. ………………………………………………………………….. .5 1.1 Operating Safety…………………………………………………………………………..5 1.2 Operator Safety while using Internal Combustion Engines……………………………..6 1.3 Label Locations………………………………………………………………………………7 1.4 Safety and Operating Labels……………………………….…………………………….8-9 2. OPERATION …………………………………………………………….……………………... 10 2.1 Control…………………………………………………………………………………….…….10-11 2.2 Preparing the Machine for First Use …………………………………………………...….……12 2.3 Before Starting……………………………………………………..………………….…………..12 2.4 To Start …………………………………………………………………………………………….12 2.5 To Stop ……………………………………………………………….…………………..…….. -
Page 5: Safety Information
1. SAFETY INFORMATION 1.1 Operating Safety Only trained personnel are permitted to start, operate, and shut down the machine. They have received instruction on how to properly use the machine and are familiar with required safety devices The machine must not be accessed or operated by children and people impaired by ... -
Page 6: Operator Safety While Using Internal Combustion Engines
1.2 Operator Safety while using Internal Combustion Engines DO NOT smoke when refueling the engine or during any other fuel handling operation. DO NOT refuel a hot or running engine. DO NOT refuel the engine near an open flame. ... -
Page 7: Label Locations
1.3 Label Location... -
Page 8: Safety And Operating Labels
Safety and Operating Labels CONMEC machines use international pictorial labels where needed. These labels are described below: Ref. Label Meaning DANGER! Engines emit carbon monoxide; operate only in well-ventilated area. Read the Operation Manual for machine information. No sparks, flames, or burning objects near the machine. - Page 9 Ref. Label Meaning CAUTION! Check the fuel. Use only clean, filtered gasoline fuel. WARNING! Hand injury if caught in moving belt. Always replace belt guard. CAUTION! Tie-down point. Key switch, engine start: Start WARNING! Hot surface! WARNING! Read and understand the supplied Operator’s Manual before operating the machine.
-
Page 10: Operation
2. OPERATION 2.1 Controls... - Page 11 Ref. No. Description Ref. No. Description Machine Frame Engine Operator’s Seat Bottom Engine Mounted Plate Right Gearbox Assy. Belt Guard Right Trowel Arm Assy. Guard Ring Chain Bottom Clutch Left Gearbox Assy. Belt Left Trowel Arm Assy. Sprinkle System Guard Ring...
-
Page 12: Preparing The Machine For First Use
2.2 Preparing the Machine for First Use 2.2.1 Make sure all loose packaging materials have been removed from the Machine. 2.2.2 Check the machine and its components for damage. If there is visible damage, do not operate the machine! Contact our dealer immediately for assistance. 2.2.3 Take inventory of all items included with the machine and verify that all loose components and fasteners are accounted for. -
Page 13: To Stop
2.5 To Stop 1. Return the control levers to their neutral position and release pressure on the throttle foot pedal. 2. Release pressure on the safety stop switch. 3. To stop the engine, turn the keyswitch to “O” (off). NOTICE: Release the safety stop switch for emergency stop. 2.6 Operation To utilize your Ride-On Trowel to its fullest capacity, the machine should be driven in the direction that the operator is facing. -
Page 14: Maitenance
3 MAINTENANCE 3.1 Periodic Maintenance Schedule The chart below lists basic trowel and engine maintenance. Refer to engine manufacturer’s Operator's Manual for additional information on engine maintenance. A copy of the engine Operator's Manual was supplied with the machine when it was shipped. To service the engine, tilt the seat forward. -
Page 15: Lubrication
3.3 Lubrication 1. Engine oil The long life and successful operation of any piece of machinery is dependent on frequent and thorough lubrication Before using the trowel, always check your engine for oil. Use proper engine oil as recommended in the engine manufacturer’s manual. Fill crankcase to levels as recommended. -
Page 16: Trouble Shooting
3.5 Trouble Shooting SYMPTOM POSSIBLE CAUSES SOLUTION Engine does not start. Engine problem. Consult engine manufacturer’s service manual. Machine out of Operator is over-steering. The movement of each gearbox balance; wobbling is controlled by “stops” to provide excessively. the correct relationship of the control arm movement to machine movement. -
Page 17: Technical Data
4. TECHNICAL DATA Model CRT836-2 CRT836-4 CRT836-5 CRT836-6 Chinese B&S Kohler Engine type Honda GX690 Petrol Engine Vanguard CH740 Power kw(hp) 13.4(17.8) 16.5 (22.1) 16.7(23.0) 20.1(27.0) Operating weight kg(lb) 339 (746) 340 (748) 332 (730) 339 (746) Blade speed 75-150 Working Dia. - Page 18 Sound Specification The required sound specification: CRT836 Series CRT846 Series The sound pressure level at operator’s location (L 89dB(A) 91dB(A) The guaranteed sound power level (L 110dB(A) 112dB(A) These sound values were determined according to ISO 3744 for the sound power level (LWA) and ISO 11204 for the sound pressure level (LpA) at the operator’s location.
-
Page 19: Ec Declaration Of Conformity
: 1. Category / Art / Categoría / Catégorie: Power Trowel 2. Type / Typ / Tipo / Type: CRT836-2, CRT836-4, CRT836-5, CRT836-6 CRT846-4, CRT846-6 has been produced in accordance with the following standards:/in übereinstimmung mit folgenden Richtlinien hergestellt worden ist:/ha sido fabricado en conformidad con las siguientes normas: / a été... - Page 20 CONMEC ENGINEERING CO., LTD Add: No.88, 2# Industrial Avenue, An Wu Road, Wu Qiao County, Feng Xian, Shanghai, P.R.C Tel: 86 (0)21 57407318 Fax: 86 (0)21 57406955 E-mail: sales@conmec.cn www.conmec.cn Version: 2016/01/01...
Need help?
Do you have a question about the CRT836-2 and is the answer not in the manual?
Questions and answers