Subscribe to Our Youtube Channel
Related Manuals for Pima CLH4x2
Summary of Contents for Pima CLH4x2
- Page 1 CLH4x2 Cellular communication adapter for the Hunter-Pro system Installer guide PIMA Electronic Systems Ltd. 5 Hatzoref street,Holon Israel 5885633. Tel: 972.3.6506400 E-mail: sales@pima-alarms.com...
- Page 2 Read this guide in its entirety before attempting to program or operate your system. Should you misunderstand any part of this guide, please contact the supplier or installer of this system. Copyright © 2019 PIMA Electronic Systems Ltd.
- Page 3 Disposal of used batteries must be made in accordance with local waste recovery and recycling regulations. Overview The CLH4x2 is designed to connect to the Hunter-Pro intruder alarm system and allows it to communicate to the central monitoring station and the (PIMAink 3.0) app via network and cellular channels.
- Page 4 Insert a SIM into the cellular transmitter (see Figure 3). If needed, insert a second SIM. Note: If the CLH4x2 is replacing a GSM200 unit, first remove the GSM200 from the alarm system’s control box. Case A - There is no VHF/UHF radio transmitter connected to the system - Mount the cellular transmitter using the CLH card into the black connector.
- Page 5 Case B - A VHF/UHF radio transmitter is connected to the system - Disconnect the cable from the radio transmitter. - Assemble the CLH4x2 unit to the box with the two screws without the cellular transmitter mounted on it. - Reconnect the radio transmitter cable.
- Page 6 Note: If the Hunter-Pro system is partitioned, you can set different account numbers for each partition. The account numbers used for reporting are set on CLH4x2 and not Hunter-Pro (see Hunter-Pro system programming section down below). • Main channel – set this option if the cellular IP channel will be a main reporting channel, meaning this channel will always report to the monitoring center.
- Page 7 If the Hunter-Pro system is partitioned it is required for each partition to report with its own Account ID, you must set an account ID to each partition. The partition numbers that will be reported are the numbers programmed into the CLH4x2 unit. Go to the following menu: Communication ...
- Page 8 ENTR NEXT ENTR Connection type NET4PRO Select the NET4PRO module and press ENTR (note – even though there is no NET4PRO module on the system, this is a necessary parameter for proper functioning with CLH4x2). • Select Cloud Registration.
Need help?
Do you have a question about the CLH4x2 and is the answer not in the manual?
Questions and answers