1. Manuals
  2. Brands
  3. Raco Manuals
  4. Kitchen Appliances
  5. MA3-4
  6. Disassembly instructions

Raco MA3-4 Disassembly Instructions

Hide thumbs
1
2
3

Advertisement

Table of Contents

DISASSEMBLY INSTRUCTIONS FOR MA3-4
YOU MUST OBSERVE ALL CAUTIONS AND WARNINGS POSTED
ON ALL DEVICE LABELS AND AS LISTED IN THIS MANUAL.
FAILURE TO DO SO MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH.
WARNING!
DO NOT ATTEMPT TO INSTALL, PERFORM
MAINTENANCE, OR SERVICE ANY RACO PRODUCT UNTIL YOU
HAVE READ THOROUGHLY AND UNDERSTAND COMPLETELY
ALL INSTRUCTIONS, SAFETY RULES, CAUTIONS, WARNINGS,
AND DANGERS CONTAINED IN THIS MANUAL. FAILURE TO
COMPLY CAN RESULT IN ACCIDENTS INVOLVING FIRE,
ELECTRIC SHOCK, AND SERIOUS PERSONAL INJURY OR
DEATH. SAVE THIS MANUAL AND REVIEW FREQUENTLY FOR
CONTINUING SAFE OPERATION, AND FOR INSTRUCTING
OTHERS WHO MAY USE RACO PRODUCTS.
1. Read and closely follow all Warnings, Cautions, and
Instructions in this manual. Failure to do so may result in
voiding the RACO Warranty.
CAUTION!
2.
disassembly or maintenance procedures not specifically
recommended in this Manual in order to preserve the RACO
Warranty. If unauthorized or non-recommended practices or
procedures are performed, RACO reserves the right to deny
warranty claims for any defect at the sole discretion of RACO.
You MUST check with RACO prior to any

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MA3-4 and is the answer not in the manual?

Questions and answers

Related Manuals for Raco MA3-4

Summary of Contents for Raco MA3-4

  • Page 1 Manual in order to preserve the RACO Warranty. If unauthorized or non-recommended practices or procedures are performed, RACO reserves the right to deny warranty claims for any defect at the sole discretion of RACO.
  • Page 2 Disassembly is not recommended under any circumstance. However, under extreme conditions, if there is no other opportunity to return the unit to RACO or enlist the services of a certified RACO Technician or Repair Specialist, the following instructions may be used as alternative guidelines.
  • Page 3 5. Remove the thrust tube. (remove set screw first, if present, or heat and overpower the Loctite threadlocker if no set screw is present) 6. Remove the front screw guide. (Some simply snap on others are retained by a roll pin and washer.) 7.

Table of Contents