Mylaps X2 BASELINK Quick Start Manual page 3

QUICK START GUIDE
1
INSTALLING
An obstacle free line of sight is required.
The range is 500 - 1000 meters.
Obstacle can cause interference including
trees, buildings, dunes, water and steel
objects.
Pipe diameter is Ø 42.4 mm (1.74 inch/size 7).
Use a 8 mm allen wrench to mount BaseLink
on pipe.
BASELINK
A
Installation Diagram
* Not included
B
Check BaseLink LED Lights
Timing Software*
Ethernet
Cable*
X2 BaseLink
X2 Server*
Ethernet Ethernet
Cable* Cable*
Ethernet
Cable
2m
X2 Decoder*
POE
Injector
Coax*
Power Cable
Loop*
Flashing Blue
BaseLink Startup Mode
Flashing Green
BaseLink Idle Mode
X2 Server Connected in Master Mode
Flashing Red
BaseLink Idle Mode
X2 Server Disconnected in Master Mode
Use the Cable Strain
Relief to give the
Ethernet Cable
some slack
LED Status Indicator
Ethernet
Cable
25m
OUT -> BaseLink
IN -> X2 Server
Keep Dry
Solid Blue
BaseLink Reset Mode
Press Reset Button 4 sec
Solid Green
BaseLink Broadcast Mode
X2 Server Connected in Master Mode
Solid Red
BaseLink Diagnostics Mode
X2 Server Connected in Master Mode
3