Advertisement
9. Installation Instruction
1) Flush mounting
Flusn mounting in 86 box
2)
1. Connect wire on the terminal
2. Fasten the product to the junction box( light window upward)
3. Make sure it's stable and reliable after installation
LIFEBEING SENSOR
page 10 of 12
MSA043D 485
1. Ceiling mounting with a cut of 55-65mm
2. Connect wire on the terminal
3. The middle circle is the reset button
4. Bending the spring clip backward to
push it into the pre-opened hole in the
ceiling
5. Make sure it's stable and reliable after
installation
Version: A0
Advertisement
