Operating Instructions - Cuisinart PerfecTemp TEA-200C Instruction And Recipe Booklet

OPERATION
AUTO START
For activating the "Auto Start" function
under the water-brewing mode and the
tea-brewing mode.
" " [ arrow buttons to the left of
the LCD Screen]
1. Adjust the water-brewing temperature,
which ranges between 105°F and 212°F
(40°C and 100°C).
2. Set the current time for the "Auto Start"
function under the water-brewing
mode and the tea-brewing mode.
" " [ arrow buttons to the right
of the LCD Screen]
1. Adjust the tea-brewing time, which
ranges between 30 seconds and
10 minutes.
2. Set the start time for the "Auto Start"
function under the water-brewing
mode and the tea-brewing mode.
HOT WATER
For activating the water-brewing function.
TEA TYPE
Optional tea type includes Green, White,
Oolong, Herbal, Black/Boil and Custom, the
corresponding indicator of selected tea will
turn on when your required tea is selected.
TEA/ CANCEL
For activating the tea-brewing function
and cancel the water-brewing process
or tea-brewing process.
TEA STRENGTH/KEEP WARM
1. Optional tea strength includes Strong,
Medium, Mild and Custom, the
corresponding indicator of selected
strength will turn on when your required
strength is selected.
2. Hold and press "TEA Strength/Keep
warm" button for 1 second to activate
the "Keep warm" function, and its
corresponding indicator will light solidly.
To cancel, hold and press the "TEA
Strength/Keep warm" button for
1 second again.
LCD display (with blue LED backlight)
Green Tea (175˚F [79°C])
•
White Tea (185˚F [85°C])
•
Oolong Tea (190˚F [87°C])
•
Herbal Tea (200˚F [93°C])
•
Black & Boil Teas
•
(212˚F [100°C], full boil)
Custom
•
Strong
•
Medium
•
Mild
•
BEFORE USING YOUR
TEA MAKER
If you are using Tea Maker for the first time,
it is recommended that you clean your tea
maker before use by brewing a full kettle of
water twice and then discarding the water.
NOTE: The maximum capacity for brewing
water is 1.7 L, and the water amount for
brewing tea is 1.0 L.
i. BREW WATER
1. Place the tea maker on a flat surface.
2. Remove the kettle from the power base.
Open the kettle lid and then fill the kettle
with the desired amount of water. The
water level must be within the Min and
the Max mark shown on the kettle body.
Then close the kettle lid.
NOTE: Do not fill the water over the
maximum level, as water may spill out of
the spout when boiling. Ensure that the
lid is firmly in place before plugging the
power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. All
the indicators on the control panel will
light solidly for 3 seconds, and then only
the LCD display, the indicators of the
two "Custom" and the indicator of
"TEA Strength/Keep warm" button light
solidly. And the "Temperature" shown in
the LCD display is 212°F (100°C), and
the "Time" is 3:00 .The appliance enters
into the standby mode.
8