Canon 5244B001 User Manual page 173

Select Range
Set All Images to Print Once
Choosing Images for Printing (DPOF)
Set the number of prints.
Press the op buttons or turn the 7 dial
to set the number of prints (maximum 99).
Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
You cannot set the number of copies for
index prints. You can only choose which
images to print (as shown in Step 2).
Press the n button to complete the
setting and restore the menu screen.
Choose [Select Range].
Follow Step 1 on p. 172 to choose [Select
Range], then press the m button.
Choose images.
Follow Steps 2 – 3 on p. 149 to choose
images.
Make print settings.
Press the op buttons to choose [Order],
then press the m button.
Choose [Select All Images].
Follow Step 1 on p. 172 to choose [Select
All Images], then press the m button.
Make print settings.
Press the qr buttons or turn the 7 dial to
choose [OK], then press the m button.
173