Summary of Contents for Pedigree Technologies OneView AT-130
Page 1
Asset Tracker AT-130 Document ID: IM-AT-130 Last Updated: March 25, 2021 Pedigree Technologies recommends using a professional installer for optimal results. Please let your Pedigree Technologies representative suggest a provider if you need help with your hardware installations. PedigreeTechnologies.com | Support: (701)-499-0022...
Page 2
AT-130 Prerequisites Required Information • Name of asset (ex: Trailer, Generator, Rolloff etc) • Detailed information about the asset (year, make, model, VIN, license plate, etc.) • State, area, organization, or group the asset belongs to (ex: Texas - Midland - Equipment, etc.) •...
Page 3
AT-130 Installation Steps, Continued Installation Before You Begin TURN TO THE LAST PAGE - WRITE DOWN THE REQUIRED INFORMATION!!! • DO NOT DRILL OR SCREW INTO ROLLOVER PROTECTION STRUCTURES OR FALLING OBJECT PROTECTION STRUCTURES (ROPS/FOPS) • DO NOT MOUNT NEAR STRONG MAGNETIC SOURCES •...
Page 4
3. Leave the activation pin in the device for a full 15 seconds (the pin will fall out if moved) Wait 5 minutes after installing/activating the device before calling Pedigree Technologies installation support. This will give the device time to send a reading.