Table of Contents
Advertisement
8.5
8.5
CAUTION
NOTICE
Check dimension (u) [mm]
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing cartridge group
Removing cartridge group
Locked safety segments (76080) during disassembly
Observe the maximum tightening torque for the nuts (90458) so as not
to shear off the threaded studs of the safety segments (76080).
Fit four nuts (74027) complete with washers (74018), equally spaced
around circumference, and tighten.
Remove insulation (from bearing casing).
Removing safety segments / releasing casing
Take nuts (90458) out of toolbox and screw them onto threaded studs
of safety segments (76080) on internal part of compressor casing
(76000).
Tighten nuts (90458) to a maximum torque of 30 Nm.
The internal part of the compressor casing (76000) has now been
separated from the external part (74000) and can be removed.
Note the control dimension (u).
Dimension
u
Operation Manual / TPL76-C
8
8.5
TPL76-C
21.8
Page 96
Advertisement
Table of Contents
