Advertisement
Quick Links
The design and specifications are subject to change without
prior notice for product improvement. Consult with the sales
agency or manufacturer for details.
CR103-RG57A3
REMOTE CONTROLLER ILLUSTRATION
(Function selection)
Thank you very much for purchasing our products.
Please read this manual carefully before using the
remote controller.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Direct Air RG57A3/BGEF
Summary of Contents for Direct Air RG57A3/BGEF
- Page 1 REMOTE CONTROLLER ILLUSTRATION (Function selection) The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. CR103-RG57A3 Thank you very much for purchasing our products. Please read this manual carefully before using the remote controller.
- Page 2 Handling the remote controller CONTENTS Location of the remote controller. Keep the remote controller where its signals can reach the receiver of the Handling the remote controller ........indoor unit. (a distance of 8m is allowed). Remote controller specification........Features of remote controller buttons ....... How to set up the funcitons.........
- Page 3 IMPORTANT: The remote controller is only enabled within10 Remote Controller Specification minutes after the indoor unit is powered on, and the indoor unit must be switched off. Model RG57A3/BGEF Rated Voltage 3.0V(Dry batteries R03/LR03×2) POWER OFF button: Press this button to turn off ON/OFF...
- Page 4 How to set up the functions 3. Press TIMER ON button. NOTE: The indoor unit will beep for 2 seconds indicating the TIMER ON function being set up successfully. Auto-start function 2. Press MODE button. Then 1. Press & Anti-cold air function press &...
- Page 5 General Anti-cold air function setting: Speed control of indoor fan motor after the set NOTE: The parameter of general anti-cold air is fixed regardless temperature reached of room temperature. 1. Press & button to choose F4. 1. Press & button to choose F3. TEMP TEMP 2.
- Page 6 Louver angle memory function Heating only or Cooling & heating setting 1. Press & button to choose F6. 1. Press & button to choose F5. TEMP TEMP 2. Press MODE button. Then press & button to select HH or CH. (HH: Heating only, CH: Cooling &...
- Page 7 High temperature setting Cleaning Filter Reminder 1. Press & button to choose F9. 1. Press & button to choose E3. TEMP TEMP 2. Press MODE button. Then press & button to 2. Press MODE button. Then press & button to choose on or of .
- Page 8 Twins setting Network Address setting 1. Press & button to choose E6. 1. Press & button to choose E8. TEMP TEMP 2. Press MODE button. Then press & button to 2. Press MODE button. Then press & button to choose the network address between 0 to 63 or choose 0(no twins), 1(main unit) or 2(subsidiary unit) Indicates cancelling the the adress modified by remote 3.
- Page 9 Point check function When the air condtioner enter the information enquiry status, it will display the code value in the next 25s after Press the LED DISPLAY button( Mute button for some display name is displayed, the details are as follows, remote controllers) of remote controller three times and then press AIR DIRECTION button ( Swing button for some Display...
Need help?
Do you have a question about the RG57A3/BGEF and is the answer not in the manual?
Questions and answers