Configuration Parameters; Standard Parameters; Global Key Parameters - Metcom Solutions MCS301 Product Manual

18 Configuration parameters

18 Configuration parameters
Below configuration parameters can be changed depending on the access.

18.1 Standard parameters

• Demand register 1,2,3,4,7 period
• Demand register 1,2,3,4,7 number of period
• Limiter Threshold Normal
• Limiter Threshold Emergency
• LP1 Capture Period
• LP2 Capture Period
• LP Average Capture Period
• LP Max Capture Period
• LP Min Capture Period
• LP Harmonics Capture Period
• Secret change
• Security policy changed (meter)
• Security policy changed (IHD)
• M-Bus security parameters changed
• Transformer ratio- current
• Transformer ratio- voltage
• Limiter action activated (Attr. 11, IC 71, changed to any action)
• Limiter action deactivated (Attr. 11, IC 71, changed to any action)
• Minimum Time Under Threshold
• Minimum Time Over Threshold
• Time Threshold for Under Voltage Detection
• Time Threshold for Over Voltage Detection
• Threshold for Under Voltage Detection
• Threshold for Over Voltage Detection
• Time Threshold for Missing Voltage
• Threshold for Missing Voltage
• Time threshold for long power failure

18.2 Global key parameters

• Authentication Key for meter change
• Encryption Unicast key for meter change
• Encryption Broadcast key for meter change
• Authentication Key for IHD change
• Encryption Unicast key for IHD change
• Master Key Change
• Authentication Key for Local Port
• Encryption Unicast Key for Local Port
MCS301 meter - product Manual 1.25
Page 91 of 142
MetCom Solutions GmbH