Table of Contents
Advertisement
en operation
13.8 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press
.
1.
The activated "Ready in" time is
paused.
Press
repeatedly until the dis-
2.
play indicates the desired "Ready
in" time.
Press
.
3.
The changed "Ready in" time is ac-
tivated.
13.9 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
13.10 Adding laundry
Press
.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
30
Add or remove laundry.
3.
Close the appliance door.
4.
Press
5.
13.11 Cancelling the pro-
Press
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
– If the water level is high, start
Remove the laundry → Page 30.
3.
13.12 Resuming the pro-
Start the Spin programme or se-
1.
lect a suitable programme for
draining.
→ "Programmes", Page 23
Press
2.
.
13.13 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switching off the appli-
Turn the programme selector to
1.
Off
Turn off the tap.
2.
.
gramme
.
the Rinse programme.
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 23
gramme when the pro-
gramme status is Rinse
Hold
.
ance
.
Advertisement
Table of Contents
