Advertisement
Table of Contents
CORDLESS GREASE GUN
Operational Precautions - General Safety Instructions
1. Consider work area environment. Do not expose tools to rain. Do not use
tools in damp or wet locations：Keep work area clean and well lit. Do not
use tools in the present of flammable liquids or gases.
2. Guard against electric shock. Avoid body contact with earthed or
grounded surfaces.
3. Keep children away. Do not let visitors touch the tools or extension cord.
All visitors should be kept away from work area.
4. Store idle tools. When not in use, tool should be stored in a dry locked
up place, out of reach of children.
5. Do not force the tool. It will do the job better and safer at the rate for
which it was intended.
6. Stay alert. Watch out what you are doing：Use common sense. Do not
Instruction Manual
JTAE911
Advertisement
Table of Contents
Related Manuals for KTC JTAE911
Summary of Contents for KTC JTAE911
- Page 1 Instruction Manual CORDLESS GREASE GUN JTAE911 Operational Precautions - General Safety Instructions 1. Consider work area environment. Do not expose tools to rain. Do not use tools in damp or wet locations：Keep work area clean and well lit. Do not use tools in the present of flammable liquids or gases.
- Page 2 operate tool when you are tired. Check damaged parts. Before further use of the tool, a guard or other part is damaged should be carefully checked to determine that it will operate properly and perform its intended function. 7. Check for alignment of moving parts, blinding of moving parts, breakage of parts, mounting and any other condition that may affect its operation.
- Page 3 4. To reduce the risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger. 5. Use of an attachment not recommended or sold by the charger manufacture may result in a risk of fire, electric shock, or injury to persons.
- Page 4 Specifications JTAE911 - Cordless Grease Gun Item Number JTAE911 Description CORDLESS GREASE GUN Voltage 18V D.C. Delivery 75g / mim Current 2.0 to 5.5A Acceptable Grease Up to NLGI No. 1 to 2 Weight 3.07kg (Battery 0.72kg) Accessories JHE180G -...
- Page 5 1. Charger is plugged into a 100V A.C outlet only. 2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and the red Indicator light is “blinking”. When the battery pack temperature returns to between 0°C (32°F) and 50°C (122°F), the charger will automatically begin charging.
- Page 6 Operating Instructions Removing or Installing Battery Pack (See Fig.1 Fig.2) 1. Always switch off the machine before insertion or removal of the battery pack. 2. To remove the battery pack, push the button on the battery pack and pull the tool unit from the battery pack in the direction.
- Page 7 Tool Operating Cartridge Loading 1. Draw back plunger handle fully until the groove of piston rod is latched into the slot on the tube cap. 2. Do not fill grease from the fill plug. 3. Only use sausage bag grease for applications. 4.
- Page 8 Troubleshooting KYOTOTOOLCO.,LTD. 128,SAYAMASHINKAICHI,KUMIYAMA-CHO, KUSE-GUNKYOTO613JAPAN TEL:81-774-46-3717FAX:81-774-46-3768...
Need help?
Do you have a question about the JTAE911 and is the answer not in the manual?
Questions and answers