Advertisement
Table of Contents
Contents
- 1 Introduction
- 2 Installation
- 3 Charging
- 4 Button Operation
- 5 Handlebar Remote: Power On/Off
- 6 Handlebar Remote: Battery Check
- 7 Handlebar Remote - Headset: Bluetooth Pairing
- 8 Handlebar Remote: Factory Reset
- 9 Handlebar Remote: Headset Control
- 10 Handlebar Remote Button Operation
- 11 Videos
- 12 Documents / Resources
Sena Handlebar Remote Manual
Introduction
Installation
NOTE:
If your handlebar requires better grip for holding the Handlebar Remote in place, apply a single or double rubber band around the handlebar.
Charging
Button Operation
Handlebar Remote: Power On/Off
Power On
Power Off
Handlebar Remote: Battery Check
Handlebar Remote - Headset: Bluetooth Pairing
NOTE:
- You can control the headset using the Handlebar Remote only after you pair them together.
- The Handlebar Remote supports Sena headsets with Bluetooth 4.1.
Handlebar Remote: Factory Reset
Handlebar Remote: Headset Control
To control your headset using the Handlebar Remote, please refer to your headset's User's Guide at www.sena.com for button operations on functions such as phone, music, and intercom.
Handlebar Remote Button Operation
| Type | Operation | Button Command | Headset LED |
| Basic Function | Volume adjustment | Move the Joystick up or down | - |
| Configuration menu | Press the Front Button for 12 seconds | - | |
| Bluetooth Pairing |
Mobile phone pairing | Press the Joystick for 5 seconds | Blue & red alternatively flashing |
| Second mobile phone pairing | Press the Front Button for 5 seconds | Blue flashing | |
| Tap the Rear Button within 2 seconds | |||
| Media selective pairing | Press the Joystick for 5 seconds | Red flashing | |
| Tap the Front Button within 2 seconds | |||
| Phone selective pairing | Press the Joystick for 5 seconds | Blue flashing | |
| Tap the Rear Button within 2 seconds | |||
| Intercom pairing |
Press the Front Button for 5 seconds | Red flashing | |
| Tap the Front Button of any one of the two Handlebar Remotes | |||
| Mobile Phone |
Answer & end phone call | Tap the Rear Button | - |
| Voice dial | Tap the Rear Button | - | |
| Speed dial | Double tap the Rear Button | - | |
| Reject incoming call | Press the Front Button for 2 seconds | - | |
| Intercom |
Start/end each intercom | Tap the Front Button | - |
| End all intercoms | Press the Front Button for 1 second | - | |
| Music | Play/pause Bluetooth music | Press the Joystick for 1 second | - |
| Track forward/back | Move the Joystick left or right for 1 second | - | |
| FM radio on | Press the Rear Button for 1 second | - | |
| FM radio off | Press the Rear Button for 1 second | - | |
| Select preset | Tap the Rear Button | - | |
| FM Radio | Seek stations | Move the Joystick left or right for 1 second | - |
| Scan up FM band | Double tap the Rear Button | - | |
| Stop scanning | Double tap the Rear Button | - | |
| Save preset while scanning | Tap the Rear Button | - | |
Follow us on Facebook
www.facebook.com/senabluetooth
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Tel (North America): 408-300-9797
E-mail: support@sena.com
VideosSena Bluetooth Handlebar Remote Review Video
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Handlebar Remote and is the answer not in the manual?
Questions and answers