KMART 42767503 Assembly Instructions

Metal tray table

Download this manual

Please read instructions carefully. Remove all parts from the carton. Be sure you have all parts before you start assembling.

Place all parts on a clean and ﬂat soft surface, such as carpet or a rug to prevent from being scratched.

Assembly by an Adult required

42767503 METAL TRAY TABLE

Assembly Instructions

Step 1 :

all screws until assembly is complete.

1 pc

2 pcs

Step 2 : Ensure all the screws have been tightened, put the

table tray (Part C) on the leg frame (step 1), the assembly

2 pcs

is completed.

1 pc

2 pcs

Fasten leg tubes (Part A & B) by screws (Part D, E). Do not tighten

Please note: If the table is

unstable after assembly,

adjust by adding Part G

under the legs.

Page 1 42767503 METAL TRAY TABLE Assembly Instructions Please read instructions carefully. Remove all parts from the carton. Be sure you have all parts before you start assembling. Place all parts on a clean and ﬂat soft surface, such as carpet or a rug to prevent from being scratched.
Page 2 CARE INSTRUCTIONS: WIPE CLEAN WITH A DAMP CLOTH. DO NOT USE ABRASIVE MATERIALS AND SOLVENTS. STORE IN A DRY PLACE WARNING : 1) DO NOT STAND OR SIT ON THE TABLE. 2) ENSURE TABLE IS USED ON EVEN, FLAT GROUND. 3) DO NOT USE THE TABLE UNLESS ALL BOLTS , SCREWS AND KNOBS ARE FIRMLY SECURED.