Zip Heater 801350 Installation Instructions

Externally Mounted Water Filtration System For ChillTap
Before starting: Determine suitable location for fi lter taking into account:
• Distance to mains water supply.
• Distance to appliance.
• Clearance below fi lter head of at least 300 mm.
• Accessibility for future fi lter changes.
Fig.1
Step 1 - Fit filter head to wall of cupboard
The fi lter head should be mounted on a cupboard panel that allows ready access for future fi lter replacement with a
minimum of 300 mm unobstructed clearance under the fi lter head. (See Fig.1 and Fig.3). Use two of the screws provided
to mount the fi lter head bracket to the cupboard wall. (See Fig.2)
Fig.2
801352 - May 2013 v1.00
Installation Instructions
801350 / 801351 - 0.2 Micron Filter Kit
Pressure limiting valve (PLV)
and backfl ow prevention
isolation valve
(not supplied)
Fig.3
Page 1 of 4