Page 2
As far as patents or other rights of third parties are concerned, liability is only assumed for modules, not for the described applications, processes and circuits. EnOcean does not assume responsibility for use of modules described and limits its liability to the replacement of mod- ules determined to be defective due to workmanship.
The user manual for older modules can be downloaded from the product website (V2.2). ▪ Basic Functionality EMCSx is an energy-harvesting wireless magnet con- tact sensor for EnOcean systems. Powered by a solar cell, EMCSx works absolutely maintenance-free. An integrated energy store allows operation for several days in total darkness. In dark surroundings, a coin cell battery can be retrofitted.
Secure Mode). The teach-in telegram identifies the device manufacturer and the function and type of the device via the EEP used. For EASYFIT devices, EnOcean is set as manufacturer with ID 0x00B. Commissioning and Mode Change The module is shipped in Transport Mode (Mode 3) to switch off the energy store for long term shelf storage and air cargo.
Page 15
Radio Telegram Timing The setup of the EMCSx transmission timing reliably avoids possible collisions with data pack- ages of other EnOcean transmitters as well as disturbances from the environment. 3.5.1 Standard Mode Transmission Timing In Standard Mode with each transmission cycle, 3 identical sub-telegrams are transmitted within 40 ms.
Page 25
Lead glass or glass with metal coating, steel furniture ◼ The distance between EnOcean receivers and other transmitting devices such as computers, audio and video equipment that also emit high-frequency signals should be at least 0.5 m. A summarized application note to determine the transmission range within buildings is AN001 “EnOcean Wireless Systems - Installation Notes”...
REGULATORY NOTES EMCSA Market Approval for European Union (CE) Hereby, EnOcean GmbH declares that the radio equipment EMCSA is in compliance with the essential requirements and other relevant provisions of the EU Radio Equipment Directive 2014/53/EU (RED). A copy of the Declaration of Conformity can be obtained from the product webpage.
Page 28
OEM’s finished product), under EnOcean’s FCC ID number if the OEM require- ments are met. FCC OEM Requirements n order to use EnOcean’s FCC ID number, the OEM must ensure that the following condi- tions are met: ◼ The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met.
Page 30
ENOCEAN MAGNET CONTACT SENSOR ISED Regulatory Statement The EMCSU device contains the EnOcean module STM 320U that complies with Industry Can- ada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ARIB Certificate Regulatory Statement The EMCSJ device contains the EnOcean module STM 420J. The STM 420J module has been developed and tested to meet the approval requirements for ARIB STDT108. For sales and operation on the Japanese market, the EMCSJ device is marked with the corresponding ARIB Marking with number (003-130160).
Need help?
Do you have a question about the EasyFit EMCSA and is the answer not in the manual?
Questions and answers