Table of Contents
Advertisement
Quick Links
EnOcean BLE Wall Mount Occupancy and Daylight Sensor
430051
Description
EMDC Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person-movement using a
passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor.
Under standard operation conditions, EMDC Easyfit sensor is self-supplied via its solar cell in conjunction with an internal energy store, which enables
the sensor to operate for four days in absolute darkness.
Key Features
Radio Frequency / Standard:
Radio Channel:
Transmission Power:
Transmission Range:
Recommended Installation:
Motion Detection Radius:
Light Level Sensor:
Required Light Level:
Operation Time Without Light:
Backup Battery Type (optional):
Operation Time With Backup Battery:
Infrequent bright light (200 lux 2 hrs / day)
Consistent low light (65 lux 5 hrs / day)
Total Darkness
Product Dimension:
Operating Conditions:
Radio Certification:
© Copyright Deco Lighting, Inc. 2019
www.getdeco.com
info@getdeco.com
2917 Vail Ave.
t: (800) 613-DECO
Commerce Ca 90040
f: (310)366-6855
Client:
Project Name:
2.4 GHz / Bluetooth Low Energy (Advertising Mode)
BLE CH 37, 38 and 39 (Advertising Channels)
+4 dBm
typ. 75 m outdoor line of sight / 10 m indoor
Ceiling-mounted at 2.5m (8.5ft) ... 3m (10 ft) height
5 m (16.5 ft.) when installed 2.5 m (8.5 ft.) high
0 ... 65000 Lux / +- 5% accuracy at full scale
200 lux for 6 hours per day
96 hours
CR2032
20yrs
15yrs
7.5yrs
4.46" L x 2.58" W x 1.21" H
0 °C (32 F) ... 60 °C (140 F) Indoor use only
20 % r.h. ... 85 % r.h. Non-condensing
RED (Europe), FCC (US), ISED (Canada)
Deco Lighting practices a program of continuous product development, and as a result product
specifications change frequently. We reserve the right to change product specifications without
notice. Contact Deco for the latest product information.
Order #:
Type:
Qty:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EnOcean Easyfit EMDC
Summary of Contents for EnOcean Easyfit EMDC
- Page 1 Order #: Project Name: Type: Qty: EnOcean BLE Wall Mount Occupancy and Daylight Sensor 430051 Description EMDC Easyfit motion detection with illumination sensor is a self-powered device that monitors the environment for person-movement using a passive infrared (PIR) sensor and measures the light level via a dedicated illumination sensor.
- Page 2 Range Diagram Wireless sensors and fixtures must be located typically within 33ft (10m) or 246ft (75m) outdoor line of sight. Fixture Top View Sensor 10 ft (3 m) 66 ft (20 m) 10 ft (3 m) 66 ft (20 m) Sensor Detection Range Ceiling 8.5 ft...
- Page 3 Installation Instructions: Tools Required -Screw Driver -Backup battery (CR2032) for walk test Planning Remove the sensor from its packaging and place it under a bright light for 5 minutes to provide the required startup charge. In the meantime, take a moment to plan for the sensor’s successful operation and optimal communication with other system components.
- Page 4 (shown below). This can be removed after test completion. 4. Press the LRN button once and check that the LED blinks once to confirm that EMDC is operational. 5. Learn in EMDC into the desired receiver(s) by using one of the following options: a.
Need help?
Do you have a question about the Easyfit EMDC and is the answer not in the manual?
Questions and answers