How To Erase The Codes Of Lost Or Stolen Remote Controls - Clifford Sabre II Owner's Manual

How to erase the codes of lost or stolen remote controls

If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. To do so, use the "Erase all channels" feature (see
User-selectable features on pages 13-14). This will clear all remote control codes
from the system memory. Then simply program each remaining and/or replacement
remote control as noted in the Adding new remote controls section on page 14.
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
For a Clifford Dealer near you, call 1-800-CLIFFORD or visit our Internet Website at
© Copyright Clifford Electronics, Inc., 1996
Sabre II is covered by
5,157,375 and other patents
http://www.clifford.com
31-701C/SAB2OM/396