Passive i/o dc current/voltage input splitter with dual isolated 2-wire 4-20ma transmitter outputs (42 pages)
Summary of Contents for Acromag 5028-626
Page 1
APZU Cable Breakout (5028-626) USER’S MANUAL ACROMAG INCORPORATED 30765 South Wixom Road Wixom, MI 48393-2417 U.S.A. Tel: (248) 295-0310 Email: solutions@acromag.com Copyright 2021, Acromag, Inc., Printed in the USA. Data and specifications are subject to change without notice. 8501151B...
The information contained in this manual is subject to change without notice, and Acromag, Inc. (Acromag) does not guarantee its accuracy. Acromag makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
It is important that the user employ satisfactory overall system design. It is understood and agreed by the Buyer and Acromag that this is the Buyer's responsibility.
USER’S MANUAL APZU Cable Breakout Figure 1 5028-626 Breakout Panel Figure 2 Male to Male 1-foot cable The I/O signals of the APZU-303 include 20 TTL, three RS485 signal pairs, Signal Descriptions: UART to USB port, USB 2.0, Ethernet via RJ-45, push button reset, and power-on push button.
Page 8
With LVDS input an optional internal differential termination in the XDC file set DIFF_TERM_ADV = TERM_100 or DIFF_TERM = TRUE. Acromag, Inc. Tel: 248-295-0310 - 7 - - 7 - https://www.acromag.com...
Page 9
USB 5 volts will interfere with power up sequence requirements of the APZU. Disconnect USB port when not in use. Signals: All Models Eth_LED0 Gigabit Ethernet Interface (J7) Eth_LED1 PHY_MDIO_P PHY_MDIO_N PHY_MDI1_P PHY_MDI1_N PHY_MDI2_P Acromag, Inc. Tel: 248-295-0310 - 8 - - 8 - https://www.acromag.com http://www.acromag.com...
Page 10
Signal: POWER_EN_PB Push Button SW2 SW2 is the push button that activates power on reset signal to the Zynq module. Signal: PS_POR_PB Acromag, Inc. Tel: 248-295-0310 - 9 - - 9 - https://www.acromag.com http://www.acromag.com...
101.73 mm (4.01 in) Width: 72.26 mm (2.84 in) Weight Breakout Panel: 4.832 oz (136.984 g) Weight Cable 4.0912 oz (115.984 g) Unit Weight (does not include shipping material Acromag, Inc. Tel: 248-295-0310 - 10 - - 10 - https://www.acromag.com http://www.acromag.com...
The following table shows the revision history for this document: Release Date Version EGR/DOC Description of Revision 17-FEB-2021 LMP/ARP Release with product introduction. 1-OCT-2021 Table 2.1 UART1_TX and RX Switched Acromag, Inc. Tel: 248-295-0310 - 11 - - 11 - https://www.acromag.com http://www.acromag.com...