Advertisement
Quick Links
USER MANUAL FOR INSTALLATION, USE,
MAINTENANCE AND CONTROL OF THE EQUIPMENT
Combined playground equipment D06-2
I. TECHNICAL SPECIFICATIONS
1. General Characteristics
Model
Age group
Maximum free fall height
Types of games
Admissible surfaces for the fall area
Standards compliance
Warranty period
TECHNICAL SPECIFICATIONS
Company: IMPRESIA 99 LTD
The town of Provadiya
Tel.: 051844136 Fax: 051846943
Mobile: 0887 496953
Email: impresia@mail.bg
www.impresia.net
D06-2
2 - 6 y. o.
100 cm
Climbing, sliding, balancing
Grass, sand, shock-absorbing synthetic surface,
wood chips
BS EN1176-1, BS EN1176-3, BS EN71-3.
24 months
1
Advertisement
Related Manuals for IMPRESIA 99 D06-2
Summary of Contents for IMPRESIA 99 D06-2
- Page 1 Mobile: 0887 496953 Email: impresia@mail.bg www.impresia.net TECHNICAL SPECIFICATIONS USER MANUAL FOR INSTALLATION, USE, MAINTENANCE AND CONTROL OF THE EQUIPMENT Company: IMPRESIA 99 LTD Combined playground equipment D06-2 I. TECHNICAL SPECIFICATIONS 1. General Characteristics Model D06-2 Age group 2 - 6 y. o.
- Page 2 2. Dimensions of the Equipment and Minimum Space for Placement 3. Materials Used The structural elements are produced of selected dried softwood with the appropriate profile. Their technical and operational characteristics correspond to the loads required during the operation of the equipment. The equipment structure is designed in accordance with the EN1176-1 requirements both in terms of the fixed and variable loads depending on the number of users in the particular area, and in regards with all requirements of this standard for protection against falls and protection against all types of clamps.
- Page 3 The slides are made of multi-layer fibreglass resistant to UV rays and have the adequate strength required for their use by children of the specific age group. They are smooth, easy to be cleaned and have no sharp edges and protrusions. The slides are accompanied by the required Declaration of Conformity prepared on the basis of the Test Report for compliance with the requirements of BS EN 71-3 (“Safety of Toys - Migration of Certain Elements”) issued by an accredited laboratory.
- Page 4 Ordinance. > In case of any troubles, measures to eliminate the identified hazards and risks for the safe operation of the playground should be taken. ………………… For company: IMPRESIA 99 Ltd...