Advertisement
Quick Links
USER MANUAL FOR INSTALLATION, USE,
MAINTENANCE AND CONTROL OF THE EQUIPMENT
I. TECHNICAL SPECIFICATIONS
1. General Characteristics
Model
Age group
Maximum free fall height
Maximum number of users
Size of the facility
Safety zone
Types of games
Admissible surfaces for the fall area
Standards compliance
Warranty period
TECHNICAL SPECIFICATIONS
Company: IMPRESIA 99 LTD
Combined slide model T06-1
The town of Provadiya
Tel.: 051844136 Fax: 051846943
Mobile: 0887 496953
Email: impresia@mail.bg
www.impresia.net
T06-1
2 – 6 y. o.
59 cm
2
206 х 54 х 129 см
17 м2
Climbing, sliding, themed games
Grass, sand, shock-absorbing synthetic surface,
wood chips
BS EN1176-1, BS EN1176-3, BS EN71-3.
24 months
1
Advertisement
Related Manuals for IMPRESIA 99 T06-1
Summary of Contents for IMPRESIA 99 T06-1
- Page 1 Mobile: 0887 496953 Email: impresia@mail.bg www.impresia.net TECHNICAL SPECIFICATIONS USER MANUAL FOR INSTALLATION, USE, MAINTENANCE AND CONTROL OF THE EQUIPMENT Company: IMPRESIA 99 LTD Combined slide model T06-1 I. TECHNICAL SPECIFICATIONS 1. General Characteristics Model T06-1 2 – 6 y. o. Age group...
- Page 2 2. Dimensions of the Equipment and Minimum Space for Placement 3. Materials Used • The structural elements are produced of selected dried softwood with the appropriate profile. Their technical and operational characteristics correspond to the loads required during the operation of the equipment. The equipment structure is designed in accordance with the EN1176-1 requirements both in terms of the fixed and variable loads depending on the number of users in the particular area, and in regards with all requirements of this standard for protection against falls and protection against all types of clamps.
- Page 3 • The slides are made of multi-layer fibreglass resistant to UV rays and have the adequate strength required for their use by children of the specific age group. They are smooth, easy to be cleaned and have no sharp edges and protrusions. The slides are accompanied by the required Declaration of Conformity prepared on the basis of the Test Report for compliance with the requirements of BS EN 71-3 (“Safety of Toys - Migration of Certain Elements”) issued by an accredited laboratory.
- Page 4 III. OPERATING AND MAINTENANCE INSTRUCTION OF THE SLIDE EQUIPMENT 1. The commissioning of the installed equipment by cement stabilization with concrete foundations shall be performed after the final maturing of the concrete (not less than 48 hours after its washing). 2.
-
Page 5: Guarantee Card
- Hidden defects in installation work in anchoring due to a poorly executed concrete foundation (slab) by the client. Such a problem may occur with insufficient covering thickness or poor quality concrete...... For company: “IMPRESIA 99” OOD...