Samsung LE32A Series Training Manual page 21

Ⅱ. Inside of Tanzanite Model
Control & Connection Panel
Control & Connection Panel
9 COMPONENT IN
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on
the rear of your set and the other ends to corresponding component video out connectors
on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the
Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector
("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes
labeled Y, B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the
other ends to corresponding audio out connectors on the DTV or DVD.
10 SERVICE
-Connector for SERVICE only.
11 PC IN [PC] / [AUDIO]
-Connect to the video and audio output jack on your PC.
12 DIGITAL AUDIO OUT (OPTICAL) DTV Only
- Connect to a Digital Audio Component.
★ When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the
TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical
jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not
the TV.