Troubleshooting - AmazonBasics B073Q48YGF Manual

Troubleshooting

Problem
Full-time surge protection
outlets stop providing power
to equipment. Circuit breaker
button is projecting from the
side of the unit.
The UPS does not perform
expected runtime.
The UPS will not turn on.
10
Possible Cause
Circuit breaker has
been tripped due to an
overload.
Battery not fully
charged.
Battery is worn out.
The on/off switch is
designed to prevent
damage from rapidly
turning it off and on.
The unit is not
connected to an AC
outlet.
The battery is worn out.
Mechanical problem.
The frequency is
outside of the operating
range of 47-63 Hz.
Solution
Turn the UPS off and unplug at
least one piece of equipment.
Wait 10 seconds, reset the
circuit breaker by pressing
the button, and then turn the
UPS on.
Recharge the battery by leaving
the UPS plugged in.
Please contact Amazon about
replacement batteries.
Turn the UPS off. Wait
10 seconds and then turn the
UPS on.
The unit must be connected to a
110/120 V 50/60 Hz outlet.
Please contact Amazon about
replacement batteries.
Please contact Amazon.
Turn the UPS off. Make sure the
frequency range is within
47-63 Hz. Or you can turn the
UPS on in battery mode.