Advertisement
Step 3
Attach the connection bar onto the front axle subassembly using M8x17 shoulder
bolts (2), M6 washers (2), M6 lock nuts (2) M10 washer (1) and cotter pin (1).
Step 4
Attach the front axle assembly and front strut
to the bed using M8x20 carriage bolts (2), M8
washers (2) and M8 lock nuts (2). NOTE: the
hardware to attach the front strut to the bed
is pre-assembled to the strut.
A. Place the front axle assembly and front
strut onto the bed. Attach the front strut to
the bed first. Place the M8x25 carriage bolt
(pre-assembled to the strut) into
the pre-punched hole on the
bed and slide it into place. Lift
up slightly on the strut and
4B
tighten bolt securely.
B. Next secure the front axle
assembly to the bed using
M8x20 carriage bolts (2), M8
washers (2) and M8 lock nuts
(2). Tighten bolts securely.
Step 5
Attach the rear axle assembly
and rear struts onto the bed
using M8x20 carriage bolts (2),
M8 washers (2) and M8 lock nuts
(2). NOTE: the hardware to attach
the rear struts to the bed is
pre-assembled to each strut.
A. Slide the rear struts onto each
end of the rear axle assembly.
Continued
4A
5A
Step 5 Continued
B. Place the rear axle assembly and
rear struts onto the bed. Attach the
rear struts to the bed first. Place the
M8x25 carriage bolts
(pre-assembled to the strut) into the
pre-punched holes on the bed and
slide them into place. Lift up slightly
on each strut and tighten
bolts securely.
C. Next secure the rear axle
assembly to the bed using M8x20
carriage bolts (2), M8 washers (2)
and M8 lock nuts (2). Tighten
bolts securely.
Step 6
Attach the wheels by first placing
the nylon wheel spacers (4) onto
the front and rear axles.
Step 7
Place the wheels onto each axle (valve stems facing out) using M12 wheel washers
(4) and M12 lock nuts (4). Tighten all nuts securely. Turn the cart upright on all
4 wheels.
5B
5C
Advertisement
