Advertisement
Step 8
Attach the handle to the
yoke using M8x180 hex
bolt (1), M8 washer (1)
and M8 lock nut (1).
Tighten securely.
Step 9
The lock handles are
pre-assembled onto the
panels. NOTE: Do not
tighten the lock nuts on the
lock handles until the end
of this step. Attach the
front, back, and side panels
(2) onto the bed using the
fence assembly pins. Latch
the front and back panels
to the side panels using the
lock handles. Once all
panels are locked together
in the upright position,
tighten all M8 lock nuts on
the lock handles for smooth
operation without being
overly tight.
DO NOT EXCEED MAXIMUM OVERALL
LOAD CAPACITY 900 LBS (408 KG).
CAUTION
PERSONS SHOULD NEVER RIDE IN THE
UTILITY CART. WEIGHT RATING IS BASED
ON AN EVENLY DISTRIBUTED LOAD.
Important Safety Instructions
1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. If you do notunderstand
these instructions, need clarification or further explanation, please call our toll
free answer line for assistance at 1-800-867-6763. Monday through Friday 9:00
a.m. until 4 :00 p.m. CST.
2. Do not exceed the overall maximum load capacity of 900 lbs (408 kg).The weight
rating is based on an evenly distributed load.
3. Do not load items on the top edges of the panels. Remove panels before loading
oversized items.
4. Do not allow children to use this cart without supervision. This cart is not a toy.
5. Do not use this cart to transport passengers.
6. This cart is not intended for highway use.
7. Do not exceed 5 mph.
8. If any parts become damaged, broken or misplaced, do not use the cart until
replacement parts have been obtained.
9. Do not use the cart on surfaces or for transporting objects that can cause
damage to the pneumatic tires or tubes. Do not inflate the tires to more
than 30 PSI (2.07 BAR).
10. It is recommended that the cart be inspected for damage before each use.
11. KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE.
Assembly Instructions
Your cart requires assembly. Account for all parts and hardware before beginning
assembly. If any parts are missing, damaged or if you have questions or need
additional instructions DO NOT RETURN THIS PRODUCT TO THE RETAILER, visit us
online at www.tricam.com to complete the replacement parts submission form or call
our customer service department at 1-800-867-6763.
Tools required for assembly: pliers, adjustable wrenches and/or metric socket set
NOTE: During each step of assembly, assemble all hardware and hand tighten.
Once all the hardware is installed for that particular step, tighten all hardware.
Step 1
Turn the cart bed upside down. Use the
cardboard from the carton to keep from
scratching or damaging the finish.
Step 2
Attach the front strut and yoke to the front axle
sub-assembly using M8x180 carriage bolt (1), M8 washer
(1) and M8 lock nut (1).Tighten securely.
Advertisement
