Advertisement
Quick Links
zappi
eco-smart EV charge points
Quick Install Guide
This document covers the following models:
Single phase: ZAPPI-2H07TB, ZAPPI-2H07TW, ZAPPI-2H07UB, ZAPPI-2H07UW
Three phase: ZAPPI-2H22TB, ZAPPI-2H22TW, ZAPPI-2H22UB, ZAPPI-2H22UW
IMPORTANT!
When installing and wiring the zappi care should be taken to maintain the IP rating of the unit.
Ensure that the grommets and bungs provided are fitted, the O-ring behind the cover is seated correctly and
that the electricity cable and CT wires are fitted using an appropriate size and type of gland of at least IP65.
D3405 UNITED KINGDOM
Rev 2.1.0 May 2022
Advertisement
Related Manuals for zappi ZAPPI-2H07TB
Summary of Contents for zappi ZAPPI-2H07TB
- Page 1 Three phase: ZAPPI-2H22TB, ZAPPI-2H22TW, ZAPPI-2H22UB, ZAPPI-2H22UW IMPORTANT! When installing and wiring the zappi care should be taken to maintain the IP rating of the unit. Ensure that the grommets and bungs provided are fitted, the O-ring behind the cover is seated correctly and that the electricity cable and CT wires are fitted using an appropriate size and type of gland of at least IP65.
- Page 2 Overview zappi's with a ‘H’ in their Model Number are supplied with a built-in ethernet port (RJ45 socket) and WiFi to connect to the local network (LAN). They also come with built-in Hub functionality (vHub) which means you don’t need a separate hub to link your myenergi devices to the internet / use the myenergi app.
- Page 3 If using a harvi you need to ensure your zappi is first set to “master”. If this is a zappi. standalone zappi then it will already be set to master as part of the power up procedure.
- Page 4 If using a harvi, once the harvi has been paired, make sure that you Configure any hardwired CTs that you have connected at have disabled the corresponding hardwired CTs on the zappi CT step 10 in the CT Config menu. Three phase zappis will Config menu (See step 15).