Vcr Connections - LG 30FS4D Owner's Manual

VCR Connections

Locate the Cable jack on the back
1
of your TV. Connect this to out
jack on the back of your VCR.
Or find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect BOTH
the composite and the S- Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna jack on the back of your TV.
Back AV panel
RF coaxial wire
(75 ohm)
Output In
or
Switch
3 4
Out
S-Video
Audio
Video
R
L
VCR
CABLE ANTENNA
+75 Ω +75 Ω
COMPONENT1 COMPONENT2
(480i/480p/720p/1080i)
R R
AUDIO AUDIO
L L
P P
R R
S-VIDEO
INPUT
P P
B B
Y Y
DVD/DTV INPUT
A/V cables
not included
with TV
AUDIO
VIDEO L(MONO) R
MONITOR
OUTPUT
IN2
IN1
P A G E 1 1