Related Manuals for KNOP LS901
Summary of Contents for KNOP LS901
- Page 1 User manual LS901 © KNOP Elektronik A/S Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444...
-
Page 2: Table Of Contents
Light guide LS901 V3.1 Table of contents Warning and safety instructions: Intended use Commissioning The LED Programming Deletion Restart Turn off Maintenance Check the coverage area Cleaning Technical data Explanation of symbols and approvals © KNOP Elektronik A/S Fabriksvej 20DK-7600 Struerknop@knop.dkknop.dk+45 97840444... -
Page 3: Warning And Safety Instructions
Light guide LS901 V3.1 Warning and safety instructions: ● The battery in this product complies with the relevant IEC safety standards for batteries. ● Please read the safety instructions on the power supply before use. ● The power supply unit must meet the relevant IEC safety standards. -
Page 4: Intended Use
Light guide LS901 V3.1 Intended use LS901 is a light source that can help minimize fall injuries. For example, it can switch on the light when a person leaves the bed or when he or she presses the wristband transmitter. -
Page 5: Programming
Light guide LS901 V3.1 Programming To program the device, simultaneously press until the LED flashes green. On the left side, there is a dim light where there is already a coded transmitter. The selected memory location is displayed with flashing. If an already encoded memory location is selected, it is overwritten. -
Page 6: Turn Off
You can switch the product on again by plugging it into the main socket. Maintenance Update of LS901 It is possible to update the software of LS901. For further description please refer to KNOPtool. Check the coverage area One person activates the product at short intervals, while another person systematically walks around the area and marks on a sketch the building and the area where there is coverage. -
Page 7: Technical Data
Light guide LS901 V3.1 Technical data Frequency HF: 869.2125 MHz Range: Up to 1500 meters between LS901 and TX901 Power supply: 230VAC Usage: <1W (st.by) max 5W Plug: 2-pole EURO Battery backup: Approx. 15 hours without light, about 3 hours with light. -
Page 8: Explanation Of Symbols And Approvals
The product must not be used if the packaging is damaged. Medical Device Class 1 Manufacturer Knop Elektronik A/S, Fabriksvej 20, DK-7600 Struer Read the manual(s) before installation and commissioning. Interference may occur in an environment with equipment marked with this symbol. Can be protected against liquids before installation.