Table of Contents
Advertisement
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press Start/
5.
12.7 Cancelling the pro-
gramme
Press Start/
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 29
12.8 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.9 Switching off the appli-
ance
Press
.
▶
12.10 Filter system on the
base unit
During drying, fluff from the laundry is
collected in the base unit's filter sys-
tem. The filter system protects the ap-
pliance from fluff.
Cleaning the filter system on the
base unit
If the display shows a notification
while the appliance is in operation,
clean the base unit's filter system.
Notes
¡ You can clean the filter regularly
system even without the notifica-
tion being shown on the display.
It is not necessary to clean after
each drying cycle.
¡ If you do not clean the appliance
as described, the appliance's func-
tionality may be impaired.
Pause .
Pause .
Requirement: The display shows the
following during operation:
Open the base unit → Page 44.
1.
Remove the fluff.
2.
Make sure that you remove all dirt
from the seal.
Clean the insides thoroughly under
3.
running water and then dry them
off.
You can remove heavy soiling
carefully with a soft brush.
Ensure that you thoroughly dry off
the filter. If the filter is damp, this
may increase the drying time and
affect the drying result.
operation en
.
29
Advertisement
Table of Contents
