Related Manuals for Warmlite WL41008
Summary of Contents for Warmlite WL41008
- Page 1 2KW CONVECTOR HEATER WITH TURBO FAN YOUR SAFETY & INSTRUCTION MANUAL PLEASE READ CAREFULLY MODEL WL41008 This product is only suitable for well insulated spaces or occasional use. www.warmlite.co...
-
Page 2: Technical Data
TECHNICAL DATA Description: 2KW Convector Heater with Turbo Fan Model: WL41008 Rated Voltage: 220 - 240V Frequency: ~ 50/60Hz Power consumption: 1830-2200W DOCUMENTATION We declare that this product conforms to the following product legislation in accordance with the following directive(s): 2014/30/EU Electromagnetic Compatibility Directive. - Page 3 The plug must be fitted with a fuse of the same rating already fitted and conforming to BS 1362 and be ASTA approved. If in doubt consult a qualified electrician who will be pleased to do this for you. WARNING: This Appliance MUST be Earthed www.warmlite.co...
-
Page 4: Product Safety
PRODUCT SAFETY When using any electrical appliance, basic safety precautions should always be followed including the following: • Check that the voltage of the • Always ensure that the main circuit corresponds with appliance is placed on a firm the rating of the appliance level surface. - Page 5 • Always unplug the appliance the air cooler from becoming and allow it to cool before a trip hazard or the plug from moving it from one location to accidentally being pulled out. another. www.warmlite.co...
- Page 6 • Please ensure that the • DO NOT splash oil or water appliance is used on a stable, into the heater. level, and heat resistant • DO NOT clean the heater with surface. water. Wipe it with a semi-wet • If the supply cord or appliance soft cloth.
-
Page 7: Before Your First Use
BEFORE YOUR FIRST USE: Remove your appliance from the packaging. Locate your appliance in accordance with the safety instructions. Plug the appliance into the mains supply. Your appliance is now ready for normal use. Dispose of the packaging in a responsible manner. www.warmlite.co... -
Page 8: Installing The Feet
0 – INSTALLING THE FEET To install the feet, attach each one to the I – 1200W assembly holes and push it down firmly until it II – 2000W locks in place (see picture 1). II W/Fan – 2000W with Turbo Fan Secure each foot by tightening the corresponding screw, (see picture 2). -
Page 9: Troubleshooting And Faqs
OF THE APPLIANCE IN WATER SUCH AS Please arrange to take this appliance to your MOTOR UNITS OR PLUGS. local Civic Amenity site for recycling, once it PLEASE SEE CLEANING SECTION FOR has reached the end of its life. FURTHER INSTRUCTIONS. www.warmlite.co... - Page 10 Model Identifier(s): WL41008 Item Symbol Valve Unit Item Unit Type of heat input for electric storage, local space Heat Output heaters only (select one) Nominal heat Manual heat charge with integrated Pnom 2,015 output thermostat Minimum heat Manual heat charge control with room...
- Page 11 NOTES www.warmlite.co...
- Page 12 1 year peace of mind. *To receive your extra guarantee period, register your appliance online within 28 days of purchase by visiting: www.warmlite.co Make sure to retain your original receipt. Should you have a problem...
Need help?
Do you have a question about the WL41008 and is the answer not in the manual?
Questions and answers