M2.0 Moisture Model Recalibration - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage

4.4.7 M2.0 Moisture Model Recalibration

To adjust an M2.0 moisture calibration,
5. Tap Recalibrate.
Adjusting the M2.0 calibration does not factor in the samples originally used in the calibration. The
adjustment only uses new samples to create a new calibration. However, your initial EM curve will remain
unchanged.
H2 Classic GrainGage Calibration
1. Open Mirus.
2. Go to Setup > H2 GrainGage > Moisture Curves.
3. Select the moisture curve you want to adjust.
4. Tap the edit icon .
63